Claim Missing Document
Check
Articles

Found 11 Documents
Search

Effect of Na-EDTA on electrical characteristics NaCl electrolyte battery charging solar panels Maizana, Dina; Mungkin, Moranain; Satria, Habib; Syafii, Syafii; Siregar, Muhammad Fadlan
International Journal of Electrical and Computer Engineering (IJECE) Vol 14, No 5: October 2024
Publisher : Institute of Advanced Engineering and Science

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.11591/ijece.v14i5.pp4846-4855

Abstract

This research investigates the problem of Cu-Zn electrode batteries with NaCl electrolyte. Previous studies have indicated problems with the electrolyte and electrodes after charging, such as turbidity and deposits in the electrolyte, as well as corrosion on the electrodes. Consequently, the battery can only be used once due to a decline in its electrical characteristics after the initial charging. Through this research, improvements were made to the electrical characteristics of the battery by adding Na-EDTA to enhance usage efficiency. The research method involved mixing NaCl solution with the highest electrical conductivity, using six pairs of Cu-Zn electrodes arranged in series. The physical conditions of the electrolyte and electrodes were observed, and electrical characteristics were measured. The research results indicate that the use of NaCl+Na-EDTA electrolyte produces a battery voltage of 4.20 volts with a current of 2 Ah and can be used twice. Charging with solar panels can be done in 1 hour, but the frequency is limited to two times.
Analisa Konsumsi Daya Lampu Halogen dan LED di Bandar Udara Halim Perdanakusuma Muliyati, Muliyati; Syafriwel, Syafriwel; Siregar, Muhammad Fadlan
Al-DYAS Vol 3 No 1 (2024): FEBRUARI
Publisher : Lembaga Yasin AlSys

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.58578/aldyas.v3i1.2746

Abstract

This research aims to analyze the power consumption of halogen and LED lamps at Halim Perdanakusuma Airport. The airport field lighting system is a safety instrument in aviation at all operating airports. In the field lighting system there are 2 types of lights, namely Halogen and LED. The light replacement system requires personnel consideration to choose a type of lighting that is more efficient on the runway. This research aims to find out how efficient power consumption is. The data collection methods used in this research are literature study, observation method and interview method. Based on the results of research that has been carried out, it shows that runway lighting shows more efficient results when using LED type lights, this can be seen from the saving efficiency and also the constant light intensity.
Analisis Daya Solar Cell pada Lampu Parkiran di Bandara Sultan Muhammad Kaharuddin Sumbawa Pasaribu, Yoga Nugraha Putra; Siregar, Muhammad Fadlan; Hidayat, Jhoni
Al-DYAS Vol 3 No 1 (2024): FEBRUARI
Publisher : Lembaga Yasin AlSys

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.58578/aldyas.v3i1.2755

Abstract

This research aims to analyze the condition of parking lights that use renewable energy, namely solar cells. Basically, the condition of the parking lights is not working optimally or not in accordance with the predetermined light on time settings due to the lack of power supplying the parking lights, resulting in a lack of live time for the solar cell parking lights. Data on the equipment module used in the solar cell parking lights is collected and real data in the field or manual measurement data will then be analyzed. The results will be a comparison between the data in the tool module and the measurement data in the field. The impact is the lack of lighting in the parking area of Sumbawa's Sultan Muhammad Kaharuddin Airport. Equipment checking and routine maintenance must be carried out to resolve problems that occur with parking lights. This research provides a better understanding of renewable energy, namely solar cells.
Determining the Appropriate use of 3 Phase 150 kV Transformer Oil Using the Fuzzy Method Maizana, MT, Dina; Tampubolon, Moulando; Muhathir, Muhathir; Siregar, Muhammad Fadlan; Yahya, Yanawati
Journal of Renewable Energy, Electrical, and Computer Engineering Vol 4, No 2 (2024): September 2024
Publisher : Institute for Research and Community Service, Universitas Malikussaleh, Indonesia

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.29103/jreece.v4i2.17914

Abstract

Transformer is electrical power equipment that functions to convert electrical energy from one voltage value to another through the action of a magnetic field. Transformers are important electrical equipment because they are directly connected to electricity transmission and distribution lines. The aim of this research is to analyze transformer oil and its suitability standards. The type of research used is quantitative research using the Dissolved Gas Analysis (DGA) method. The data obtained for this method will be calculated by applying Fuzzy Logic to map the problem or determine variables. The mapping results will then be calculated using Matlab as the result of mathematical data analysis in graph form.
Sosialisasi UU Ketenagalistrikan dan Keselamatan Instalasi Bertegangan Rendah Kepada Masyarakat Kecamatan Medan Kota Bukit, Andi Nova; Syofyan, Syofyan Anwar Syahputra; Siregar, Muhammad Fadlan; Harahap, Muchsin
Karya Unggul Vol. 4 No. 1 (2024): Edisi Desember
Publisher : Akademi Teknik Deli Serdang

Show Abstract | Download Original | Original Source | Check in Google Scholar

Abstract

Sosialisasi Undang-Undang Ketenagalistrikan dan Keselamatan Instalasi Bertegangan Rendah memiliki peran penting dalam meningkatkan pemahaman masyarakat terhadap penggunaan listrik yang aman dan sesuai peraturan. Kegiatan ini dilaksanakan di Kecamatan Medan Baru dengan tujuan memberikan edukasi mengenai ketentuan hukum terkait kelistrikan serta tata cara instalasi listrik yang aman dan efisien. Metode sosialisasi melibatkan penyampaian materi secara interaktif, diskusi, dan simulasi instalasi listrik sederhana. Hasil kegiatan menunjukkan peningkatan kesadaran masyarakat terhadap pentingnya mematuhi standar keselamatan instalasi listrik, serta kemampuan mereka dalam mengenali potensi bahaya listrik di lingkungan sekitar. Sosialisasi ini diharapkan dapat mendukung terciptanya lingkungan yang aman dari risiko kebakaran atau kecelakaan akibat kelalaian dalam pengelolaan instalasi listrik. jumlah peserta pada kegitan ini kurang lebih 30 orang diman pemahaman peserta tentang pemahaman UU ketenagalistrikan,instalasi listrik mulai dari pengetahuan dasar instalasi listrik, sosialisasi PUIL 2011. Sebelum mengikuti kegiatan pelatihan nilai rata-rata adalah 40, namun setelah mengikuti kegiatan nilai rata-rata menjadi 80, maka persentase peningkatan sebesar 100%.
Optimization Of Solar Panel Usage In Grid-Connected Hybrid Energy Systems Using Fuzzy Method Maizana, Dina; Muhathir, Muhathir; Satria, Habib; Mungkin, Moranaim; Siregar, Muhammad Fadlan; Yahya, Yanawati Binti
Jurnal ELTIKOM : Jurnal Teknik Elektro, Teknologi Informasi dan Komputer Vol. 8 No. 2 (2024)
Publisher : P3M Politeknik Negeri Banjarmasin

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.31961/eltikom.v8i2.1278

Abstract

The hybrid grid-connected power generation system combines solar power, wind power, and the PLN grid to meet the electricity demands of facilities such as schools, laboratories, mosques, and kindergartens at MTs Parmiyatu Wassa'adah School. Due to insufficient wind speed below the turbine's operational threshold, wind turbines cannot contribute to electricity generation, making solar power the primary energy source. Solar power capacity is crucial for meeting the electricity needs of these facilities. This study applies the Fuzzy method to analyze the optimal utilization of solar panels in a grid-connected hybrid system for electricity demand. Simulation results indicate three levels of solar panel utilization, with the most optimal performance achieved when school electricity usage is low, and additional loads are minimized.
Impelementasi Alat Otomatis Pelipat dan Penyemprot Pewangian T-Shirt Berbasis Internet Of Things (IoT) Siburian, Dani Lamada; Satria, Habib; Siregar, Muhammad Fadlan
Journal of Telecommunication and Electrical Scientific Vol 2 No 01 (2025): Journal of Telecommunication and Electrical Scientific (JTElS)
Publisher : Program Studi Teknik Elektro, Universitas Harapan Medan

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.24010/jtels.v2i01.1054

Abstract

Pelipat pakaian otomatis adalah perangkat atau mesin yang dirancang untuk melipat pakaian secara otomatis dengan sedikit atau tanpa intervensi manual. Mesin ini biasanya digunakan untuk meningkatkan efisiensi dan konsistensi dalam proses pelipatan kain, yang sangat berguna dalam berbagai industri seperti tekstil, laundry komersial, dan manufaktur pakaian. Perangkat ini dapat menghemat waktu dan tenaga kerja, menghasilkan lipatan yang seragam dan rapi, serta mengurangi biaya operasional dalam proses pelipatan kain. Oleh karena itu, penelitian ini bertujuan untuk membuat sebuah alat portabel otomatis pelipat dan Penyemprot pewangian t-shirt berbasis IoT untuk mengurangi waktu dan tenaga bagi masyarakat. Adapun langkah-langkah untuk membuat alat pelipat pakaian dan penjelasannya adalah sebagai berikut: penulis menggunakan motor servo sebagai alat penggerak pelipat pakaian di setiap sisinya, Arduino sebagai alat perintah sebelum menggerakkan alat-alat lain, sensor ultrasonik sebagai alat penerima sinyal yang digunakan untuk menentukan jarak benda (pakaian), dan NodeMCU ESP8266 yang berguna sebagai alternatif menjalankan fungsi mikrokontroler serta koneksi internet. Hasil pengujian dari tabel data pakaian pertama dengan berat 180 gr menunjukkan bahwa ketiga motor servo memiliki arus yang relatif rendah. Tegangan yang diperlukan dan daya yang dikonsumsi oleh masing-masing servo tercatat dalam rentang yang serupa, yaitu antara 1,29 W hingga 1,51 W. Hasil pengujian ini menunjukkan bahwa motor servo memiliki performa yang stabil dan sesuai dengan kebutuhan dalam proses pelipatan pakaian ukuran S dengan waktu kerja alat 10 detik untuk satu lipatan pakaian. Pada data pakaian kedua dengan berat 200 gr, terlihat bahwa ketiga motor servo memiliki arus yang relatif serupa. Tegangan yang dibutuhkan dan daya yang dikonsumsi oleh masing-masing servo berada dalam kisaran 1,32 W hingga 1,41 W. Hal ini menunjukkan bahwa motor servo memiliki performa yang stabil dan konsisten dalam proses pelipatan pakaian ukuran M dengan waktu kerja alat 10 detik untuk satu lipatan pakaian. Sedangkan dari data pakaian ketiga dengan berat 250 gr, dapat dilihat bahwa ketiga motor servo memiliki arus yang cukup serupa. Tegangan yang dibutuhkan dan daya yang dikonsumsi oleh masing-masing servo tercatat dalam rentang yang serupa, yaitu antara 1,32 W hingga 1,42 W. Hal ini menunjukkan bahwa motor servo tetap memiliki performa yang stabil dan konsisten dalam proses pelipatan pakaian ukuran L dengan waktu kerja alat 10 detik untuk satu lipatan pakaian.
Perhitungan Gerakan Bandul Pada Permainan Lato - Lato Menggunakan Metode Sistem Keadaan Setimbang Siregar, Muhammad Fadlan; Abdillah, Tomi; Syafriwel; Hermansyah; Habib Satria
JURNAL PENDIDIKAN & PENGAJARAN (JUPE2) Vol. 1 No. 2 (2023): Juli 2023
Publisher : Pusat Penelitian dan Pengabdian Masyarakat STIKes Banyuwangi

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.54832/jupe2.v1i2.161

Abstract

Lato – lato atau yang dikenal dengan lato – lato tek tek adalah jenis permainan ditahun 90an dan ditahun ini 2022 kembali lagi popular, dengan jumlah pengguna permainan ini adalah anak – anak, remaja dewasa, bahkan Presiden Republilk Indonesia Joko Widodo memainkannya, permainan ini menggunakan bola kecil berbahan padat yang gantungkan dengan bentang tali yang sama sehingga mendapatkan momen dan arah yang sama pada saat digerakkan, apabila bandulnya dilepaskan diberi simpangan dari posisi setimbangnya maka bandul tersebut akan berosilasi bergerak secara bolak balik berbenturan dengan bola bandulnya, metode yang digunakan pada penelitian ini adalah pengamatan yang dilakukan dengan kecepatan lambat, sedang dan cepat, dari hasil pengamatan didapatkan nilai sudut pada gerakan lambat terendah adalah 35 derajat dan tinggi adalah 45 derajat, pada gerakan lambat di dapat sudut terendah 60 derajat dan tertinggi 90 derajat, pada keadaan cepat didapat nilai sudut terendah 150 derajart dan tertinggi 360 derajat dengan Panjang bentang tali 15 centimeter dan waktu 1 menit dan jumlah gerakan yang bervariasi.
Home Security System by Three Methods Using Arduino Nano Based PV Energy Source Mungkin, Moranain; Sijabat, Tonggo; Bahri, Zulkifli; Satria, Habib; Siregar, Muhammad Fadlan; Dayana, Indri
Jurnal Teknik Elektro Indonesia Vol 6 No 1 (2025): JTEIN: Jurnal Teknik Elektro Indonesia
Publisher : Departemen Teknik Elektro Fakultas Teknik Universitas Negeri Padang

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.24036/jtein.v6i1.710

Abstract

The existence of technology today aims to help make human work easier, including in the aspect of residential security systems. The increase in crime, especially theft in residential homes, is increasingly worrying. Therefore, the application of Arduino Nano control system technology with other supporting systems is the right solution to improve the safety of residents and minimize theft. This research aims to design a device called Home Security System by Three Methods that uses PV energy sources and the Arduino Nano control system. This tool features three security methods: SMS gateway, phone call, and alarm sound in two locations. Tests were carried out by simulating the opening and closing of doors/windows, then paying attention to the system response on the smartphone and the two alarms. The test results show that when a door/window is opened, the system sends an alert SMS to the user's smartphone within ± 9 seconds. The alarm sounds inside the house and the security post. If the user does not respond, the system will make a phone call within ± 55 seconds after the door/window is opened. The system works based on the movement or gap in the door/window using a magnetic switch sensor of ± 2.5 cm.
Pengujian Saturasi Trafo Arus terhadap Pengaruh Kerja Rele Proteksi Ikhwan Fahmi, Muhammad; Fahmi Syawali Rizki, Mhd; Siregar, Muhammad Fadlan; Indah Rezkika, Sri; Milando, Arif; Arif, Ahmad; Zahrul Ulum
Impression : Jurnal Teknologi dan Informasi Vol. 4 No. 2 (2025): July 2025
Publisher : Lembaga Riset Ilmiah

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.59086/jti.v4i2.960

Abstract

Fenomena saturasi pada trafo arus memiliki dampak krusial terhadap kinerja rele proteksi dalam sistem tenaga listrik. Pengujian eksperimental dilakukan untuk menganalisis karakteristik trafo arus, dengan fokus pada hubungan antara arus masukan primer (I1​), arus keluaran sekunder (I2​), dan tegangan keluaran (V). Hasil menunjukkan korelasi positif antara I1​ dengan I2​ dan V. nilai V tetap konstan pada 5,5 Volt meskipun I1​ meningkat dari 600 mA ke 800 mA, dan nilai I yang kembali ke 1,3 A pada tegangan tertentu dalam pengujian terpisah. potensi saturasi inti trafo atau perilaku non-linear komponen yang diuji, yang berpotensi memengaruhi akurasi pengukuran arus oleh rele proteksi. khususnya saat mendekati atau memasuki kondisi saturasi. Perilaku non-linear, seperti yang ditunjukkan oleh nilai V yang stabil pada dua titik I1​ yang berbeda, dan penurunan I pada tegangan yang meningkat, pengujian karakteristik trafo arus secara menyeluruh untuk memastikan rele proteksi dapat beroperasi secara akurat dan tepat waktu, terutama dalam menghadapi kondisi gangguan yang mungkin menyebabkan saturasi trafo.   The saturation phenomenon in current transformers has a crucial impact on the performance of protection relays in electric power systems. Experimental testing was conducted to analyze the characteristics of current transformers, focusing on the relationship between primary input current (I1), secondary output current (I2), and output voltage (V). The results showed a positive correlation between I1 and I2 and V. The V value remained constant at 5.5 Volts even though I1 increased from 600 mA to 800 mA, and the I value returned to 1.3 A at a certain voltage in a separate test. potential saturation of the transformer core or non-linear behavior of the components under test, which could potentially affect the accuracy of current measurement by the protection relay. especially when approaching or entering saturation conditions. Non-linear behavior, as indicated by stable V values at two different points of I1, and a decrease in I at increasing voltage, thorough testing of the current transformer characteristics to ensure the protection relay can operate accurately and timely, especially in the face of fault conditions that might cause transformer saturation.