Claim Missing Document
Check
Articles

Found 4 Documents
Search
Journal : Jurnal Teknik Sipil dan Perencanaan

KAJIAN KUALITAS GENTENG KERAMIK DENGAN PENAMBAHAN PASIR SUNGAI (Studi Kasus Pasir Sungai Blorong, Boja, Kabupaten Kendal) Tugino, Tugino
Jurnal Teknik Sipil dan Perencanaan Vol 13, No 1 (2011): Jurnal Teknik Sipil & Perencanaan
Publisher : Semarang State University

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.15294/jtsp.v13i1.1320

Abstract

Abstrak:  Ceramic roof tiles production process that uses basic ingredients of clay with high plasticity resulting in reduced quality of roof tiles, many of the cracked tiles and the shape deviation is high, so the value of quality ceramic tiles do not satisfy or are below the average standardSNI.03-2905-1998. The purpose of this study is to investigate the effect of river sand Blorong to quality ceramic roof tiles. The samples were ceramic roof tiles with a mixture of river sand Blorong 0%, 3% and 5%. Data collection method used is the method of observation. This observation method to observe the testing process in the field and in laboratory BBTPPI Semarang. The process of making sample was taken three tile craftmen, craftmen create each roof tiles with a mixture of Blorong river sand as experimental group and ceramic tile without Blorong sand mixture as the control group. The results found that the quality of ceramic roof tile observed from the outside view of the river sand ceramic tile without Blorong with ceramic tile using Blorong river sand shows that the view out the same, the surface of the roof tiles are not smooth, hair cracks, and the composition of the top batten both neat and good. The study also found that there is the influence of Blorong river sand of assessment length and width, height relationship, assessment forms, the quality of water absorption, and impact on the resistance to bending loads.Keywords: ceramic roof tiles, plasticity, bending loadsAbstrak: Proses produksi genteng keramik yang menggunakan bahan dasar tanah liat dengan keplastisan tinggi mengakibatkan kualitas genteng berkurang, banyak genteng yang retak*retak dan penyimpangan bentuknya tinggi, sehingga nilai kualitas genteng keramik belum memenuhi atau masih di bawah rata*rata standar SNI.03*2905*1998. Tujuan penelitian ini adalah untuk mengetahui pengaruh penambahan pasir sungai Blorong terhadap kualitas genteng keramik. Sampel penelitian adalah genteng keramik dengan campuran pasir sungai Blorong sebesar 0%, 3%, dan 5%. Metode pengumpulan data yang digunakan  adalah metode observasi. Metode observasi ini untuk mengamati proses pengujian di lapangan dan di laboratorium BBTPPI Kota Semarang. Proses pembuatan sampel dilakukan di tiga pengrajin genteng, masing*masing pengrajin membuat genteng dengan campuran pasir sungai Blorong sebagai kelompok eksprimen dan genteng keramik tanpa campuran pasir Blorong sebagai kelompok kontrol. Hasil penelitian didapat bahwa kualitas genteng keramik ditinjau dari pandangan luar antara genteng keramik tanpa pasir sungai Blorong dengan genteng keramik dengan  menggunakan pasir sungai Blorong menunjukkan bahwa pandangan luar sama, permukaan genteng tidak mulus, retak*retak rambut, dan susunan di atas reng keduanya sama rapih dan baik. Penelitian ini juga menemukan bahwa ada pengaruh penggunaan pasir sungai Blorong terhadap ketetapan ukuran panjang dan lebar, ukuran tinggi kaitan, ketetapan bentuk, kualitas penyerapan air, dan pengaruh terhadap kekuatan dalam menahan beban lentur.Kata Kunci: genteng keramik, keplastisan, beban lentur
MODEL KUAT TEKAN DAN TARIK PROPORSI TRAS MURIA DENGAN KAPUR UNTUK BAHAN DASAR MORTAR Tugino, Tugino
Jurnal Teknik Sipil dan Perencanaan Vol 12, No 1 (2010): Jurnal Teknik Sipil & Perencanaan
Publisher : Semarang State University

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.15294/jtsp.v12i1.1335

Abstract

Abstract:  mortar is a mixture of binder and sand with a certain ratio, a binder of cement, lime and trace. Portland cement prices in the market higher. This lead to the high price of construction products, including a simple house san's house is very simple. Then necessary to study the use of other building materials with Portland cement substitute qualified quality and reasonably priced by the community. The object of this research: how much the mechanical properties of mortar with tie material trace (Pozolan). The purpose of this research is to explain the bond between the mattress, lime, and sand and know the basic compressive strength of mortar using a binder tras.As object in this study were from a mixture of trace mortar, lime, and sand. Samples of mortar specimens of size 5 x 5 x 5 cm 3 and 2.5 x 5 x 7.5 cm 3, the composition mix 1 trace: 1 lime: 1 sand: 1 trace: 1 lime: 2 sand and 1 trace: 1 lime: 3 sand. Variablel in this research is a mixture of variable composition and compressive strength / tensile strength. How to capture data with quality test materials, compressive strength, tensile strength test in the laboratory. Data analysis using the average. Results showed the test results of material quality mortar qualify, the average test results mix 1 trace: 1 lime: 1 sand = 47.93 kg/cm2 compressive strength, tensile strength of 4.17 kg/cm2; mix 1 trace: 1 lime : 2 sand = 40.33 kg/cm2 compressive strength, tensile strength of 3.23 kg/cm2; composition mattress is 1 lime: 3 sand = 29.85 kg/cm2 compressive strength, tensile strength of 2.23 kg/cm2. From this research it is advised to wash the mud content mattress for less than 14.04% and the composition mixture thinner for compressive strength and tensile strength can be enhancedKeywords: trace muria, lime, mortar. Abstrak: mortar merupakan campuran bahan pengikat dan pasir dengan perbandingan tertentu, bahan pengikat berupa semen, kapur dan tras. Harga semen Portland di pasaran semakin tinggi. Hal ini berakibat tingginya harga jual produk-produk konstruksi termasuk rumah sederhana san rumah sangat sederhana. Maka perlu dikaji penggunaan bahan bangunan lain pengganti semen Portland dengan mutu yang memenuhi syarat dan harga terjangkau oleh masyarakat. Obyek kajian dalam penelitian ini : seberapa besar sifat mekanis mortar dengan bahan ikat tras (Pozolan). Tujuan dari penelitian ini untuk menjelaskan ikatan antara tras, kapur, dan pasir serta mengetahui kuat  tekan dasar mortar yang menggunakan bahan pengikat tras.sebagi obyek dalam penelitian ini adalah mortar dari campuran tras, kapur, dan pasir. Sampel benda uji mortar dengan ukuran 5 x 5 x 5 cm3 dan 2,5 x 5 x 7,5 cm3, komposisi campuran 1 tras : 1 kapur : 1 pasir;  1 tras : 1 kapur : 2 pasir dan 1 tras : 1 kapur : 3 pasir. Variablel dalam penelitian ini adalah variable komposisi campuran dan kuat tekan / kuat tarik. Cara pengambilan data dengan uji mutu bahan, uji kuat tekan, uji kuat tarik di laboratorium. Analisis data menggunakan rerata. Hasil penelitian menunjukkan hasil uji mutu bahan mortar memenuhi syarat, hasil uji rata-rata campuran 1 tras : 1 kapur : 1 pasir kuat tekan = 47,93 kg/cm2, kuat tarik 4,17 kg/cm2; campuran 1 tras : 1 kapur : 2 pasir kuat tekan = 40,33 kg/cm2, kuat tarik 3,23 kg/cm2; campuaran 1 tras : 1 kapur : 3 pasir kuat tekan = 29,85 kg/cm2, kuat tarik 2,23 kg/cm2. Dari penelitian ini disarankan perlu pencucian tras agar kandungan lumpurnya lebih kecil dari 14,04% dan komposisi campuran lebih kurus agar kuat tekan dan kuat tarik dapat ditingkatkan.Kata Kunci: tras muria, kapur, mortar
KAJIAN KUALITAS GENTENG KERAMIK DENGAN PENAMBAHAN PASIR SUNGAI (Studi Kasus Pasir Sungai Blorong, Boja, Kabupaten Kendal) Tugino, Tugino
Jurnal Teknik Sipil dan Perencanaan Vol 13, No 1 (2011): Jurnal Teknik Sipil & Perencanaan
Publisher : Semarang State University

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.15294/jtsp.v13i1.1320

Abstract

Abstrak:  Ceramic roof tiles production process that uses basic ingredients of clay with high plasticity resulting in reduced quality of roof tiles, many of the cracked tiles and the shape deviation is high, so the value of quality ceramic tiles do not satisfy or are below the average standardSNI.03-2905-1998. The purpose of this study is to investigate the effect of river sand Blorong to quality ceramic roof tiles. The samples were ceramic roof tiles with a mixture of river sand Blorong 0%, 3% and 5%. Data collection method used is the method of observation. This observation method to observe the testing process in the field and in laboratory BBTPPI Semarang. The process of making sample was taken three tile craftmen, craftmen create each roof tiles with a mixture of Blorong river sand as experimental group and ceramic tile without Blorong sand mixture as the control group. The results found that the quality of ceramic roof tile observed from the outside view of the river sand ceramic tile without Blorong with ceramic tile using Blorong river sand shows that the view out the same, the surface of the roof tiles are not smooth, hair cracks, and the composition of the top batten both neat and good. The study also found that there is the influence of Blorong river sand of assessment length and width, height relationship, assessment forms, the quality of water absorption, and impact on the resistance to bending loads.Keywords: ceramic roof tiles, plasticity, bending loadsAbstrak: Proses produksi genteng keramik yang menggunakan bahan dasar tanah liat dengan keplastisan tinggi mengakibatkan kualitas genteng berkurang, banyak genteng yang retak*retak dan penyimpangan bentuknya tinggi, sehingga nilai kualitas genteng keramik belum memenuhi atau masih di bawah rata*rata standar SNI.03*2905*1998. Tujuan penelitian ini adalah untuk mengetahui pengaruh penambahan pasir sungai Blorong terhadap kualitas genteng keramik. Sampel penelitian adalah genteng keramik dengan campuran pasir sungai Blorong sebesar 0%, 3%, dan 5%. Metode pengumpulan data yang digunakan  adalah metode observasi. Metode observasi ini untuk mengamati proses pengujian di lapangan dan di laboratorium BBTPPI Kota Semarang. Proses pembuatan sampel dilakukan di tiga pengrajin genteng, masing*masing pengrajin membuat genteng dengan campuran pasir sungai Blorong sebagai kelompok eksprimen dan genteng keramik tanpa campuran pasir Blorong sebagai kelompok kontrol. Hasil penelitian didapat bahwa kualitas genteng keramik ditinjau dari pandangan luar antara genteng keramik tanpa pasir sungai Blorong dengan genteng keramik dengan  menggunakan pasir sungai Blorong menunjukkan bahwa pandangan luar sama, permukaan genteng tidak mulus, retak*retak rambut, dan susunan di atas reng keduanya sama rapih dan baik. Penelitian ini juga menemukan bahwa ada pengaruh penggunaan pasir sungai Blorong terhadap ketetapan ukuran panjang dan lebar, ukuran tinggi kaitan, ketetapan bentuk, kualitas penyerapan air, dan pengaruh terhadap kekuatan dalam menahan beban lentur.Kata Kunci: genteng keramik, keplastisan, beban lentur
MODEL KUAT TEKAN DAN TARIK PROPORSI TRAS MURIA DENGAN KAPUR UNTUK BAHAN DASAR MORTAR Tugino, Tugino
Jurnal Teknik Sipil dan Perencanaan Vol 12, No 1 (2010): Jurnal Teknik Sipil & Perencanaan
Publisher : Semarang State University

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.15294/jtsp.v12i1.1335

Abstract

Abstract:  mortar is a mixture of binder and sand with a certain ratio, a binder of cement, lime and trace. Portland cement prices in the market higher. This lead to the high price of construction products, including a simple house san's house is very simple. Then necessary to study the use of other building materials with Portland cement substitute qualified quality and reasonably priced by the community. The object of this research: how much the mechanical properties of mortar with tie material trace (Pozolan). The purpose of this research is to explain the bond between the mattress, lime, and sand and know the basic compressive strength of mortar using a binder tras.As object in this study were from a mixture of trace mortar, lime, and sand. Samples of mortar specimens of size 5 x 5 x 5 cm 3 and 2.5 x 5 x 7.5 cm 3, the composition mix 1 trace: 1 lime: 1 sand: 1 trace: 1 lime: 2 sand and 1 trace: 1 lime: 3 sand. Variablel in this research is a mixture of variable composition and compressive strength / tensile strength. How to capture data with quality test materials, compressive strength, tensile strength test in the laboratory. Data analysis using the average. Results showed the test results of material quality mortar qualify, the average test results mix 1 trace: 1 lime: 1 sand = 47.93 kg/cm2 compressive strength, tensile strength of 4.17 kg/cm2; mix 1 trace: 1 lime : 2 sand = 40.33 kg/cm2 compressive strength, tensile strength of 3.23 kg/cm2; composition mattress is 1 lime: 3 sand = 29.85 kg/cm2 compressive strength, tensile strength of 2.23 kg/cm2. From this research it is advised to wash the mud content mattress for less than 14.04% and the composition mixture thinner for compressive strength and tensile strength can be enhancedKeywords: trace muria, lime, mortar. Abstrak: mortar merupakan campuran bahan pengikat dan pasir dengan perbandingan tertentu, bahan pengikat berupa semen, kapur dan tras. Harga semen Portland di pasaran semakin tinggi. Hal ini berakibat tingginya harga jual produk-produk konstruksi termasuk rumah sederhana san rumah sangat sederhana. Maka perlu dikaji penggunaan bahan bangunan lain pengganti semen Portland dengan mutu yang memenuhi syarat dan harga terjangkau oleh masyarakat. Obyek kajian dalam penelitian ini : seberapa besar sifat mekanis mortar dengan bahan ikat tras (Pozolan). Tujuan dari penelitian ini untuk menjelaskan ikatan antara tras, kapur, dan pasir serta mengetahui kuat  tekan dasar mortar yang menggunakan bahan pengikat tras.sebagi obyek dalam penelitian ini adalah mortar dari campuran tras, kapur, dan pasir. Sampel benda uji mortar dengan ukuran 5 x 5 x 5 cm3 dan 2,5 x 5 x 7,5 cm3, komposisi campuran 1 tras : 1 kapur : 1 pasir;  1 tras : 1 kapur : 2 pasir dan 1 tras : 1 kapur : 3 pasir. Variablel dalam penelitian ini adalah variable komposisi campuran dan kuat tekan / kuat tarik. Cara pengambilan data dengan uji mutu bahan, uji kuat tekan, uji kuat tarik di laboratorium. Analisis data menggunakan rerata. Hasil penelitian menunjukkan hasil uji mutu bahan mortar memenuhi syarat, hasil uji rata-rata campuran 1 tras : 1 kapur : 1 pasir kuat tekan = 47,93 kg/cm2, kuat tarik 4,17 kg/cm2; campuran 1 tras : 1 kapur : 2 pasir kuat tekan = 40,33 kg/cm2, kuat tarik 3,23 kg/cm2; campuaran 1 tras : 1 kapur : 3 pasir kuat tekan = 29,85 kg/cm2, kuat tarik 2,23 kg/cm2. Dari penelitian ini disarankan perlu pencucian tras agar kandungan lumpurnya lebih kecil dari 14,04% dan komposisi campuran lebih kurus agar kuat tekan dan kuat tarik dapat ditingkatkan.Kata Kunci: tras muria, kapur, mortar