Claim Missing Document
Check
Articles

Found 2 Documents
Search
Journal : Jurnal Teknologi Berkelanjutan

Perilaku Shearwall Pelat Bergelombang Terhadap Beban Gempa Lateral Statik Arya Rizki Darmawan; Sari Mayawati; Jumri Jumri
Jurnal Teknologi Berkelanjutan Vol 10 No 01 (2021): Vol 10 No 01
Publisher : Lambung Mangkurat University Press

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (329.198 KB) | DOI: 10.20527/jtb.v10i01.193

Abstract

Building portals with profile steel construction are very commonly used. However, with the potential for earthquakes in Indonesia which has a very large risk, the geometry of the portal must be given structural elements that can increase the lateral stiffness of the structure. One of the innovations to improve the lateral stiffness of the building portal is to provide a structural element in the form of a shearwall. Steel plate shearwall is one of the structural elements that serve to withstand lateral loads on a building, one of which is earthquake loads. Steel plate shearwall has a high slenderness rate. So that the lateral load will cause a large buckling problem in the shearwall plate. Corrugated steel plate is one of the innovations to solve the buckling problem. The purpose of this study was to analyze the effect of the wave plate shape on the shearwall. This research was conducted using numerical analysis using the ANSYS program to see thebehavior and strength of the steel plate shearwall. The shearwall models analyzed are beam-column frame type, shearwall with flat steel plate, and shearwall with corrugated steel plate, which is given a static lateral load at one end. This study shows that the yield load on the beam-column frame is 1400 kN, the shearwall for the flat steel plate is 1850 kN, and the shearwall for the corrugated steel plate is 2035 kN. The corrugated plate's geometric pattern obtained an increase in yield load of 9% compared to the flat plate. The buckling pattern that occurs in the flat plate shearwall and wave plate is diagonal shear buckling in the center area of the plate.
Pengaruh Sudut Bukaan Heksagonal Terhadap Kapasitas Geser Castellated Steel Beam Ida Barkiah; Arya Rizki Darmawan; Muhammad Fitrah Dzikry
Jurnal Teknologi Berkelanjutan Vol 10 No 02 (2021): Vol 10 No 02
Publisher : Lambung Mangkurat University Press

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.20527/jtb.v10i02.201

Abstract

The opening in the castellated steel beam body affects the increase in the flexural capacity and the shear capacity of the steel beam. The research was conducted by determining the span of elements of conventional steel beams and castellated steel beams which have the same length. Steel beams are subjected to two concentrated loads at two points in 1/3 of the span. This study concludes that the effect of the geometric opening on the castellated steel beam will decrease the shear capacity. At the hexagonal opening angle of 45°-50° there is a decrease in shear capacity of about 18%. The optimum shear capacity value occurs at an opening angle of 20° with a decrease in shear capacity of 3%. The failure pattern that occurs is diagonal buckling (buckling due to shear) of the body at 1/3 of the span.