Abdul Hamid Hamidon
Universiti Teknikal Malaysia Melaka

Published : 1 Documents Claim Missing Document
Claim Missing Document
Check
Articles

Found 1 Documents
Search
Journal : International Journal of Electrical and Computer Engineering

Design and Analysis High Gain PHEMT LNA for Wireless Application at 5.8 GHz Kamil Pongot; Abdul Rani Othman; Zahriladha Zakaria; Mohamad Kadim Suaidi; Abdul Hamid Hamidon; J.S. Hamidon; Azman Ahmad
International Journal of Electrical and Computer Engineering (IJECE) Vol 5, No 3: June 2015
Publisher : Institute of Advanced Engineering and Science

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (545.921 KB) | DOI: 10.11591/ijece.v5i3.pp611-620

Abstract

This research present a design of a higher  gain (66.38dB) for PHEMT LNA  using an inductive drain feedback technique for wireless application at 5.8GHz. The amplifier it is implemented using PHEMT FHX76LP transistor devices.  The designed circuit is simulated with  Ansoft Designer SV.  The LNA was designed using  T-network as a matching technique was used at the input and output terminal,  inductive generation to the source and an inductive drain feedback. The  low noise amplifier (LNA) using lumped-component provides a noise figure 0.64 dB and a gain (S21) of 68.94 dB. The output reflection (S22), input reflection (S11) and return loss (S12) are -17.37 dB, -15.77 dB and -88.39 dB respectively. The measurement shows the  stability was at  4.54 and 3-dB bandwidth of 1.72 GHz. While, the  low noise amplifier (LNA) using  Murata manufactured component provides a noise figure 0.60 dB and a gain (S21) of 66.38 dB. The output reflection (S22), input reflection (S11) and return loss (S12) are -13.88 dB, -12.41 dB and -89.90 dB respectively. The measurement shows the  stability was at  6.81 and 3-dB bandwidth of 1.70 GHz. The input sensitivity more than -80 dBm  exceeded the standards required by IEEE 802.16.