Ahmed Jamal Abdullah Al-Gburi
Universiti Teknikal Malaysia Melaka

Published : 3 Documents Claim Missing Document
Claim Missing Document
Check
Articles

Found 2 Documents
Search
Journal : International Journal of Electrical and Computer Engineering

Increasing radiation power in half width microstrip leaky wave antenna by using slots technique Muhannad Kaml Abdulhameed; Sarah Rafil Hashim; Noor Kamil Abdalhameed; Ahmed Jamal Abdullah Al-Gburi
International Journal of Electrical and Computer Engineering (IJECE) Vol 12, No 1: February 2022
Publisher : Institute of Advanced Engineering and Science

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.11591/ijece.v12i1.pp392-398

Abstract

The radiation power in the endfire is decreased while the main beam of half substrate integrated waveguide scan from broadside to endfire in a forward. The design of half-width microstrip leaky-wave antenna (HW-MLWA) has been presented in this work to increase the power radiation near endfire by using the slots technique in the radiation element. This slot leads to a decrease the cross-polarization. The proposed design comprises one element of HW-MLWA with repeated meandered square slots in the radiation element. One aspect of this antenna is generated by using a half substrate integrated waveguide with a full tapered feed line. The proposed antenna was terminated by load of 50 Ω, and feed on the other end of the antenna. Finally, the suggested design is simulated and acceptable results were found. The released gain is increased from 10.6 dBi to 12 dBi at 4.3 GHz. This design is suitable for unmanned aerial vehicle UAVs at C band application.
Pattern reconfigurable dielectric resonator antenna using capacitor loading for internet of things applications Aymen Dheyaa Khaleel; Osman Ghazali; Aqeel Mahmood Jawad; Ayman Mohammed Ibrahim; Massudi Mahmuddin; Ahmed Jamal Abdullah Al-Gburi; Mohammed Najah Mahdi
International Journal of Electrical and Computer Engineering (IJECE) Vol 13, No 4: August 2023
Publisher : Institute of Advanced Engineering and Science

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.11591/ijece.v13i4.pp4145-4151

Abstract

This research study presents a cube dielectric resonator antenna (DRA) with four different radiation patterns for internet of things (IoT) applications. The various radiation patterns are determined by the grounded capacitor loading to reduce interference. The DRA is constructed of ceramic material with a dielectric constant of 30 and is fed via a coaxial probe located in the antenna’s center. Capacitors are used to load the four parasitic microstrip feed lines. Each pattern of radiation is adjustable by adjusting the capacitors loading on the feed line. The proposed antenna works at 3.5 GHz with -10 narrow impedance bandwidth of 74 MHz.