Budi Susilo Soepandji
Faculty Of Engineering, University Of Indonesia, Indonesia

Published : 3 Documents Claim Missing Document
Claim Missing Document
Check
Articles

Found 2 Documents
Search
Journal : RACIC : Rab Construction Research

ANALISIS PARAMETRIK ALTERNATIF FONDASI PADA DAERAH TANAH LUNAK (STUDI KASUS: KANTOR BUPATI KAB. ROKAN HILIR, RIAU) Alfi Fadillah; Budi Susilo Soepandji
Racic : Rab Construction Research Vol 9 No 1 (2024): JUNI
Publisher : LPPM Universitas Abdurrab

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.36341/racic.v9i1.4130

Abstract

Fondasi adalah suatu bagian dari sistem rekayasa yang bekerja dengan cara meneruskan beban yang ditopangnya dan beratnya sendiri kedalam tanah atau batuan yang terletak dibawahnya. Pada penelitian ini penulis merencanakan membandingkan pondasi bored pile yang sudah di terapkan dibangunan tersebut dengan alternatif pondasi lain yaitu fondasi tiang pancang 1 dengan dalam 38meter dengan diamater 0.8 meter, Serta tiang pancang 2 dengan dalam 38meter dengan diameter 1meter dari sisi kapasitas daya dukung dan besaran terjadi penurunan. Kemudian dilakukanlah perhitungan daya dukung pondasi dengan metode Meyerhof (1976), McClelland (1974), Skempton (1966), dan Reese & O'neill (1999). Penurunan tiang tunggal dengan metode Vesic (1977) dan Poulos & Davis (1980) serta menggunakan program Plaxis v.20. Selanjutnya dari hasil perhitungan dibandingkan antara fodasi bored pile dengan tiang pancang model 1 dan 2. Didapat bahwa fondasi bored pile dan fondasi tiang pancang 1 tidak memenuhi batas izin penurunan fondasi hanya fondasi tiang pancang 2 yang memenuhi batas tersebut yakni penurunan lebih kecil dari 10% diameter fondasi.
ANALISIS TAHANAN HORIZONTAL TIANG PANCANG BARU YANG DIBEBANI LATERAL AKIBAT EFEK ADANYA TIANG PANCANG EKSISTING PADA TANAH CLAY Fardan Fikriansyah; Budi Susilo Soepandji
Racic : Rab Construction Research Vol 9 No 1 (2024): JUNI
Publisher : LPPM Universitas Abdurrab

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.36341/racic.v9i1.4902

Abstract

The method of driving new piles in existing buildings using existing piles is often used to speed up the construction period. The load distribution and displacement of the new pile need to be investigated further because of the influence of the existing pile. The lateral load displacement method (p-y curve) is used to analyze the load and displacement of the pile using threedimensional finite element analysis. The new and existing piles used are piles with a diameter of 0.6 meters, a thickness of 0.1 meters, a pile depth of 17 meters, and the distance between the new piles and the existing piles is 1 meter. The horizontal load applied is 150 kN on the pile head which is 1 meter from the ground surface. This research was carried out on clay with the Modified Cam Clay constitutive model. The results of three-dimensional finite element analysis show that the horizontal resistance of the new pile increases at the pile head due to the presence of the existing pile.