Ali Khalid Jassim
Al Mustansiriyh University

Published : 3 Documents Claim Missing Document
Claim Missing Document
Check
Articles

Found 3 Documents
Search
Journal : TELKOMNIKA (Telecommunication Computing Electronics and Control)

Design a new notched UWB antenna to rejected unwonted band for wireless communication Ansam Qasim Kamil; Ali Khalid Jassim
TELKOMNIKA (Telecommunication Computing Electronics and Control) Vol 19, No 6: December 2021
Publisher : Universitas Ahmad Dahlan

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.12928/telkomnika.v19i6.19768

Abstract

This paper presents a slotted design for ultra-wideband (UWB) antenna. Design of a rectangular UWB antenna covering the frequency range 3.1-10.6 GHz, to achieve notch characteristics in the bands at 3.1-8.4 GHz and 8.6-10.6 GHz. By changing the direction of distribution of current to apply this technique by inserting three C-shaped holes and two pairs of rectangular notches below the antenna. The simulation results reveal that the proposed structure is in good accord with the simulation results. The proposed UWB antenna size is (100x90x1.6 mm)3. This proposed design could provide a solution to eliminating bands that interfere in a UWB band depending on the aperture design. The simulated findings reveal that the UWB antenna operates in the 8.5 GHz center frequency range and rejects all frequency bands utilizing slits. This antenna design can provide a solution to remove UWB bands from 3.1-10.6 except for 8.5 GHz which only works. By using the notch, we got a large increase in the gain. makes to be a suitable candidate for X-band-UWB applications.
Design and Analysis of Broadband Elliptical Microstrip Patch Antenna for Wireless Communication Ali Khalid Jassim; Raad H. Thaher
TELKOMNIKA (Telecommunication Computing Electronics and Control) Vol 16, No 6: December 2018
Publisher : Universitas Ahmad Dahlan

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.12928/telkomnika.v16i6.9246

Abstract

In this paper presents the design and manufacture of a new broadband elliptical patch antenna with a microstrip feed line and optimum antenna  parameters. The antenna dimension of (30×21×1.6) mm3 and fabricated on an FR-4 epoxy substrate having relative dielectric constant ε_r=4.3, loss tangent tan (δ) =0.002 and the feed line used has characteristic impedance of 50Ω.The designed antenna has the capability of operating in the bandwidth (6.95 - 30.94) GHz and the gain (6.8) dBi. The antenna performance was modified by inserting a slots in the ground plane to achieve impedance bandwidth (when S11≤ -10dB) and slots to patch to improve the gain. The modified antenna was designed to be used for fifth generation (5G) mobile communication. The simulation results are obtained using CST software.
Compact reconfigurable PIFA antenna for wireless applications Abdullah Ali Jabber; Ali Khalid Jassim; Raad Hamdan Thaher
TELKOMNIKA (Telecommunication Computing Electronics and Control) Vol 18, No 2: April 2020
Publisher : Universitas Ahmad Dahlan

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.12928/telkomnika.v18i2.13427

Abstract

This paper presents, new compact and multiband frequency reconfigurable planar inverted-F antenna (PIFA). The antenna is designed and optimized to cover mobile application devices like GPS, WLAN/Wi-Fi, WiMAX, 4G LTE, UWB, and satellite applications. The frequency reconfigurability is obtained by using only a single RF switch (PIN diode) for changing the operating frequency. The antenna dimensions are 45.6x39.6x1.6 mm3 printed on an FR-4 epoxy substrate with relative dielectric constant εr = 4.3, loss tangent tan (δ) = 0.002 and 50 Ω coaxial feed line. The proposed antenna has two patches connected by a single PIN diode. The antenna introduces nine resonant frequencies under (S11 ≤ -10 dB) which are: 0.980 GHz, 3.392 GHz, 3.924 GHz, 4.554 GHz, 5.82 GHz, 6.81 GHz, 7.305 GHz, 8 GHz and 8.105 GHz in the ON and OFF states of the PIN diode which are applicable to cover GSM900, WLAN/Wi-Fi, WiMAX, 4G LTE, UWB, and satellite systems. The obtained maximum simulated gain is 8.45 dB at 6.81 GHz. The lowest return loss is obtained to be -42 dB at 5.854 GHz. Detailed simulation and measurement results are explored and studied in this research. The CST software is used to simulate and optimize the proposed PIFA antenna. The proposed antenna has been fabricated and produced a good agreement with the simulation results.