<![CDATA[The calculation of control parameters for a system control method is based on the model of the system with assumed fixed internal parameters. However, these parameters can vary greatly due to several phenomena. This paper presents an adapted control of a doubly fed induction generator machine robust against the rotor resistance variations of the machine used as a generator in wind energy conversion systems. The adaptation is ensured by a system allowing to identify in real time the value of the resistance, the system used is mainly based on a Luenberger observer. The conversion system is divided into two parts, the first mechanical part containing the turbine and the gearbox, the second electrical one consisting of a double fed induction generator, linked on the stator side directly to the grid, and on the rotor, side linked to the grid through two power electronics converters interposed with a direct current (DC) link. The machine-side converter is used to control the active and reactive powers, and the second on the grid side is used to control the DC link voltage. The converters are controlled by the sliding mode strategy, and the validity of the methods is checked by simulation using MATLAB/Simulink.]]>
