Rekayasa Mesin
Vol 10, No 3 (2019)

Pengaruh Jenis dan Ukuran Biomassa terhadap Proses Gasifikasi Menggunakan Downdraft Gasifier

Mufid, Faishal (Unknown)
Anis, Samsudin (Unknown)



Article Info

Publish Date
15 Dec 2019

Abstract

Biomass is alternative energy. This research was conducted to determine the effect of biomass type and size on the gasification process using a downdraft gasifier. Sengon and mahogany woods were used as the feedstock. The study began by conducting a proximate test of biomass feedstock to find out its properties. Than the gasification process was studied by using two sizes of biomass i.e. wood chips and blocks. Each experiment was carried out for 90 minutes and 10 kg of biomass. The air was supplied at 3 m/s. The results showed that the type and size of biomass affected the gasification temperatures, flame characteristics, and residues. Sengon wood chips provided the highest gasification temperature of 1239°C in the oxidation zone with a flame duration of 77 minutes and residue of 9.1 wt.%. For mahogany wood chips in the sequence were 1220°C, 68 minutes and 16.25 wt.%. Meanwhile for wood chips mixture of sengon and mahogany gave the flame duration of 55 minutes and residue of 15.65 wt.%. Overall, it can be concluded that under the investigated condition, a sengon wood chip was found to be the most suitable biomass for the downdraft gasifier used in this work.

Copyrights © 2019






Journal Info

Abbrev

rm

Publisher

Subject

Mechanical Engineering

Description

Rekayasa Mesin is published by Mechanical Engineering Department, Faculty of Engineering, Brawijaya, Malang-East Java-Indonesia. Rekayasa Mesin is an open-access peer reviewed journal that mediates the dissemination of academicians, researchers, and practitioners in mechanical engineering. Rekayasa ...