Journal of Applied Materials and Technology
Vol. 1 No. 1 (2019): September 2019

Simultaneous Distribution Network Reconfiguration and Optimal Placement of Distributed Generation

Abdullahi Bala Kunya (Department of Electrical Engineering, Ahmadu Bello University, Zaria - Nigeria)
Gaddafi Sani Shehu (Department of Electrical Engineering, Ahmadu Bello University, Zaria - Nigeria)
Usman Muhammad Hassan (Department of Electrical Engineering, Ahmadu Bello University, Zaria - Nigeria)
Abdurrahman Umar Lawal (Department of Electrical Engineering, University of Nottingham Malaysia Campus, Malaysia)



Article Info

Publish Date
25 Sep 2019

Abstract

A reliable, eco- and nature-friendly operation has been the major concern of modern power system (PS). To improve the PS reliability and reduce the adverse environmental effect of conventional thermal generation facilities, renewable energy based distributed generation (RDG) are being enormously integrated to low and medium voltage distribution networks (DN). However, if these systems are not properly deployed, the reliability and stability of the PS will be endangered and its quality can be dreadfully jeopardized. Among the measures taken to avoid such is optimizing the location and size of each RDG unit in the DNs. These networks are generally operated in a radial configuration, though they can be reconfigured to other topologies to achieve certain objectives. Both RDG placement/sizing and DN reconfiguration are highly non-linear, multi-objective, constrained and combinatorial optimization problems. In this study, a hybrid of Particle Swarm Optimization (PSO) and real-coded Genetic Algorithm (GA) techniques is employed for DN reconfiguration and optimal allocation (size and location) of multiple RDG units in primary DNs simultaneously. The objectives of the proposed technique are active power loss reduction, voltage profile (VP) and feeder load balancing (LB) improvement. It is carried out subject to some technical constraints, with the search space being the set of DN branches, DG sizes and potential locations. To ascertain the effectiveness of the technique, it is implemented on standard IEEE 16-bus, 33-bus and 69-bus test DNs. The proposed algorithm is implemented in MATLAB and MATPOWER environments. It is observed the power loss, voltage deviation and LB are found to be reduced by 32.84%, 12.33% and 24.03% of their respective inherent values in the biggest system when the system is reconfigured only. With the optimized RDGs placed in the reconfigured systems, a further reductions of 46.27%, 25.92% and 36.65% are observed respectively.

Copyrights © 2019






Journal Info

Abbrev

jamt

Publisher

Subject

Chemical Engineering, Chemistry & Bioengineering Civil Engineering, Building, Construction & Architecture Engineering Mechanical Engineering

Description

Journal of Applied Materials and Technology (JAMT) is aimed at capturing current development and initiatives in applied materials and technology. JAMT showcases innovative applied materials and technology, providing an opportunity for science, transfer and collaboration of technology. JAMT focuses ...