Journal of Electrical Power Control and Automation (JEPCA)
Vol 4, No 1 (2021): Juni

Analisis Perencanaan Jarak Celah Udara Pada Generator Axial

Syafriyudin Syafriyudin (Jurusan Teknik Elektro, Institut Sains dan Teknologi AKPRIND Yogyakarta)
M Suyanto (Unknown)



Article Info

Publish Date
21 Jun 2021

Abstract

The generator uses a permanent magnet so it does not require initial excitation to generate a voltage. The generator design is axial flux type, uses ceramic type permanent magnet (NdFeB), uses two flanking stator rotors. For electricity use, the AC voltage is changed to DC voltage using a rectifier for charging the accumulator. The air gap in the axial generator is the distance between the rotor and the stator. The air gap is also a place for the transfer of the magnetic field through the coil on the stator to produce a magnetic flux value that affects the induced voltage in the coil. The faster the rotation, the greater the voltage generated. This axial generator that has been designed can produce a frequency of ± 50 Hz, an effective voltage of ± 22 V when the air gap is 2 mm, the frequency measurement has an error of 10-20 Hz and an error percentage of 5-10%, with the results of measuring the induced current that has a large the same voltage.

Copyrights © 2021






Journal Info

Abbrev

jec

Publisher

Subject

Electrical & Electronics Engineering

Description

Journal of Electrical Power Control and Automation (JEPCA) rises 2 (two) times a year which is in June and December. The journal publishes articles of research results, and the articles that are entered should not be the result of plagiarism and have not yet been published elsewhere. The article ...