Journal of Engineering and Scientific Research (JESR)
Vol. 1 No. 1 (2019)

The Engine Performance Characteristics of an IDI Diesel Engine Fueled by Soybean Oil Methyl Esters

S K Keun (RCIT, Chonbuk National University, 657 Baekje-daero Deokjin-Gu Jeonju-si Jeollabuk-do 561-756, Korea)
A Ghurri (Department of Mechanical Engineering, University of Udayana, Bali Indonesia)



Article Info

Publish Date
17 Dec 2020

Abstract

An experimental investigation was conducted to evaluate the performance of an indirect injection (IDI) diesel engine using diesel(D100) and diesel-biodiesel blends (BD25, BD45, BD65) separately. The engine was run in various engine loads at constant engine speed ranging from 1000 to 2400 rpm with an interval 200 rpm. The results showed that the biodiesel content decreased the engine torque and power. This might be mainly affected by the lower LHV of the biodiesel, and also the worse combustion due to higher density of the biodiesel compared to the diesel fuel. The loss of power due to lower heating value of biodiesel were notas high as the difference in their heating value that might be down to the better lubricity of biodiesel as proved in the higher brake thermal efficiency and mechanical efficiency when using the biodiesel blends. The brake specific fuel consumption is higher with the increase of biodiesel content but the diesel fuel delivered the highest energy to run the engine. The maximum pressure inside cylinder and the heat release rate of D100 is slightly higher than those of biodiesel blends. Keywords: diesel engine, biodiesel, engine performance, emission.

Copyrights © 2019






Journal Info

Abbrev

ojs

Publisher

Subject

Civil Engineering, Building, Construction & Architecture Computer Science & IT Control & Systems Engineering Engineering Industrial & Manufacturing Engineering

Description

The focus and scopes of JESR is on but not limited to Mechanical Engineering and Material Sciences, Chemical and Environmental, Industrial and Manufacturing Engineering, Computer and Information Technology, Electrical and Telecommunication, Civil and Geodetic Engineering, Architecture and Urban ...