Isothermal Oxidation Behavior of Ferritic Oxide Dispersion Strengthened Alloy at High Temperatures

Eddy Agus Basuki (Department of Metallurgical Engineering, Faculty of Mining and Petroleum Engineering, Institut Teknologi Bandung, Jalan Ganesa No. 10 Bandung 40132,)
Nickolas Adrianto (Department of Metallurgical Engineering, Faculty of Mining and Petroleum Engineering, Institut Teknologi Bandung, Jalan Ganesa No. 10 Bandung 40132,)
Rahmadhani Triastomo (Department of Metallurgical Engineering, Faculty of Mining and Petroleum Engineering, Institut Teknologi Bandung, Jalan Ganesa No. 10 Bandung 40132,)
Akhmad Ardian Korda (Department of Metallurgical Engineering, Faculty of Mining and Petroleum Engineering, Institut Teknologi Bandung, Jalan Ganesa No. 10 Bandung 40132,)
Tria Laksana Achmad (Department of Metallurgical Engineering, Faculty of Mining and Petroleum Engineering, Institut Teknologi Bandung, Jalan Ganesa No. 10 Bandung 40132,)
Fadhli Muhammad (Department of Metallurgical Engineering, Faculty of Mining and Petroleum Engineering, Institut Teknologi Bandung, Jalan Ganesa No. 10 Bandung 40132,)
Djoko Hadi Prajitno (Nuclear Technology Center for Materials and Radiometry, National Atomic Agency of Indonesia, Jalan Tamansari No. 71, Bandung 40132)

Journal of Engineering and Technological Sciences
Vol. 54 No. 2 (2022)

This paper discusses the oxidation behaviors of ODS steel alloy of Fe-16Cr-4Al-1Ni-0.4ZrO2 at 700 ℃, 800 ℃, and 900 ℃. X-ray diffraction (XRD) as well as X-ray mapping in a scanning electron microscope were used to characterize the oxidation behavior of the samples. The rate of oxidation was measured based on the thickness of the oxide formed on the surface of the samples. Six types of oxides were identified in all ODS Fe-16Cr-4Al-1Ni-0.4ZrO2 alloy samples after the oxidation tests, dominated by Fe2O3, Fe3O4, Cr2FeO4, AlFeO3, Al2FeO4, and AlFe2O4. The oxidation kinetics of ODS Fe-16Cr-4Al-1Ni-0.4ZrO2 steel at 700, 800, and 900 ℃ followed logarithmic oxidation rate behavior.