Pengaruh Fraksi Massa Serat Terhadap Kekuatan Fatik Material Komposit Berpenguat Serat Tandan Kosong Kelapa Sawit

Devi Chandra (Universitas Andalas)
Randha Mulia (Universitas Andalas)
Dedison Gasni (Universitas Andalas)
Gusriwandi Gusriwandi (Universitas Andalas)

METAL : Jurnal Sistem Mekanik dan Termal
Vol 2, No 2 (2018)

The present study was investigated the effect of fiber mass fraction on the tensile and fatigue strength of oil palm fiber reinforced composite and resin as the matrix. Fatigue test has been performed by using rotary bending fatigue machine. The specimens were made by press hand lay-up with matrix to fiber mass ratio was 90:10, 80:20 and 70:30 respectively. Fracture surface of fatigue specimens have also been observed by using digital camera to knowing the failure mode. The results showed that the tensile and fatigue strength and fatigue life increased with increasing the fiber mass fraction as seen in the S-N curve. The fatigue limit was found 0.27 MPa, 0.55 MPa, and 0.82 MPa for composites with 90:10, 80:20 and 70:30 of matrix to fiber mass ratio respectively. The observed failure modes were matrix cracking, fiber debonding, and fiber breaking.