<![CDATA[FHR is the fetal heart rate from bpm recording detected by doppler, FHR monitoring is very important to monitor fetal health to avoid fetal distress or fetal death, FHR provides more in-depth information about how the baby is doing compared to traditional monitoring of the baby. IoT media is a medium for monitoring remote sensor values using internet connections, but there are several obstacles, namely there are doubts about the data displayed by IoT media, namely the risk of missing or unsent data, this will be very dangerous if the data that is should be monitored by doctors as a reference for medical diagnosis and treatment is lost or not displayed on the IoT, because if there is missing data it will cause inaccurate diagnosis or health treatment decisions by doctors. The aim of this study to analyze the effect of lost data on the formation of the Fetal Heart Rate graph on the IoT platform as a medium for remote diagnosis. In addition, FHR data can be saved for further diagnosis by a doctor if needed. This study uses an ESP32 microcontroller which will also be used to send data to IoT (Thinger.io). The independent variable used in this study is FHR data before it is uploaded to the IoT, and the dependent variable is FHR data when it is uploaded to the IoT. The greatest data loss is at the farthest distance of 30 meters with a value of 62.47%. Based on the research that has been done, this study has the advantage that the results obtained from Doppler are close to the BPM value in humans. And also this research has developments that can be done in the future such as adding storage to the website that is used for monitoring, and placing the right position on Doppler so that the results are more stable.]]>
Copyrights © 2022
