Otopro
Vol 18 No 1 Nov 2022

PEMBUATAN BIOETANOL DARI NIRA AREN SEBAGAI ENERGI ALTERNATIF

Frans Luntungan (Politeknik Negeri Manado)
Herotje Siwi (Jurusan Teknik Mesin Teknik Mesin, Politeknik Negeri Manado)
Artian Sirun (Jurusan Teknik Mesin Teknik Mesin, Politeknik Negeri Manado)
Priyono Priyono (Jurusan Teknik Mesin Teknik Mesin, Politeknik Negeri Manado)



Article Info

Publish Date
25 May 2023

Abstract

This research carried out the manufacture of bioethanol by utilizing palm sap as an alternative energy. Bioethanol is ethanol that can be produced through the fermentation of glucose, to produce bioethanol which is then carried out by distillation. Bioethanol is also a biofuel and one of its uses as an environmentally friendly alternative fuel. The goal to be achieved in this study is to produce bioethanol with the influence of the length of time of heating and the temperature of heating palm sap water in the distillation apparatus on the levels of bioethanol produced.  The raw material for the production of bioethanol was palm juice with natural fermentation for three days, then heated in a distillation apparatus with a heating temperature of 84-86oC, 87-89oC and 90-92oC. and the standard measuring instrument used to measure bioethanol levels is an alcohol meter.  The results of the research conducted, it can be seen that the effect of the length of time and temperature of heating palm sap in the distillation apparatus produces a volume of bioethanol of: 84-86oC = 256 ml, 87-89oC = 330 ml, 90-92oC = 383 ml, this can be seen also that the higher the heating temperature of the palm sap in the distillation apparatus resulted in a decrease in the bioethanol content, namely: 84-86oC = 83.8 %, 87-89oC = 80.8 %, 90-92oC = 77.6%. So to get a good bioethanol content, namely at a heating temperature of 84-86oC, produce bioethanol quality of 83.8%.

Copyrights © 2022






Journal Info

Abbrev

jo

Publisher

Subject

Automotive Engineering Energy Industrial & Manufacturing Engineering Materials Science & Nanotechnology Mechanical Engineering

Description

Jurnal Otopro diterbitkan 2 (dua) kali setahun yaitu bulan Mei dan November oleh Jurusan Teknik Mesin, FT-UNESA, sebagai media informasi dan forum kajian masalah ilmu Teknik Mesin. Berisi tentang tulisan ilmiah, ringkasan hasil penelitian, pembahasan kepustakaan dan gagasan kritis yang orisinil. ...