Energy, Materials and Product design
Vol. 2 No. 1 (2023): Energy, Materials and Product Design

ANALISIS SUDUT BELOK DAN KECEPATAN TERHADAP RADIUS BELOK MOBIL LISTRIK

I Made Mara (Unknown)
A. A. Alit Triadi (Unknown)
Andrian Suci Rahmawan (Unknown)



Article Info

Publish Date
31 May 2023

Abstract

As the number of cars increases, the number of accidents that occur is directly proportional to the number of accidents that occur, namely 117,949 cases and this increases by around 8.3% annually, mostly due to driver negligence and lack of vehicle stability. One important aspect in car design is the steering system which influences the response of the vehicle's steering motion to steering wheel input and has a major influence on comfort as well as safety. The purpose of this study was to determine the turning radius at various speeds and turning angles and to determine the ratio of the turning angle to the turning angle of an electric car. In the analysis phase, calculations are carried out based on slip analysis to obtain the turning radius at various speeds and turning angles, and the ratio of the turning angle to the turning angle of the electric car. At the testing stage it is carried out by determining the steer rotation angle based on the specified turning angle. The results of this study are at a speed of 30 Km/hour with a turning angle of 240 resulting in the smallest turning radius, that is, in the analysis of 5.5 m and 5.75 m of experiment and the smallest percentage of turning radius, namely the results of the analysis are 4% smaller than the experimental results. At a speed of 50 Km/hour with a turning angle of 150 produces the largest turning radius, namely, in the analysis of 9.5 m and 9 m experiments and the greatest percentage of turning radius, namely the results of the analysis are 13% smaller than the experimental results. From the results of the analysis, the ratio of the turning angle to the turning radius is 18:1.

Copyrights © 2023






Journal Info

Abbrev

empd

Publisher

Subject

Automotive Engineering Control & Systems Engineering Energy Engineering Industrial & Manufacturing Engineering

Description

Energy, Materials and Product Design is an open-access journal and published by the Department of Mechanical Engineering, Faculty of Engineering, University of Mataram, Mataram, West Nusa Tenggara, Indonesia. Articles that have been approved and published in journals can be accessed by everyone at ...