<![CDATA[Abstrak Penyebab utama jalan rusak di Indonesia karena genangan air, proses oksidasi, tanah yang tidak stabil dan kendaraan yang melampaui kapasitas. Air yang dimaksud umumnya air tawar, namun bagaimana pengaruhnya apabila air yang dimaksud adalah air laut. Tujuan penelitian untuk mengetahui upaya peningkatan stabilitas campuran AC-WC dengan penggantian sebagian filler menggunakan abu cangkang kerang dengan perendaman air laut. Penelitian dilakukan beberapa tahapan diantaranya pengujian mutu bahan, penentuan KAO variasi abu cangkang kerang 4%, 6% dan 8% dari berat filler, dilanjutkan perendaman air laut selama 24 jam dengan metode pengujian Marshall, terakhir melakukan analisis pembahasan penarikan kesimpulan. Nilai stabilitas pada persentase 4% sebesar 1337.2 kg, persentase 6% nilai stabilitasnya sebesar 1497.2 kg, dan nilai stabilitas tertinggi pada presentase 8% sebesar 1531.3 kg. Peningkatan terjadi karena cangkang kerang mengandung CaCO3, memberikan pengaruh positif pada rongga di dalam aspal semakin kecil, dan campuran semakin padat. Nilai flow mengalami penurunan dengan bertambahnya persentase abu cangkang kerang, dikarenakan abu cangkang kerang memiliki berat jenis lebih tinggi dari agregat halus sehingga aspal yang menyelimuti agregat semakin tipis dan membuat kelelehan semakin menurun. Untuk flow pada campuran abu cangkang kerang persentase 4% dan 6% nilainya sebesar 2,3 mm, nilai terendah ada pada persentase 8% sebesar 2 mm. Kata kunci: Abu cangkang kerang; air laut; filler; Marshall, stabilitas Abstract The main causes of damaged road conditions in Indonesia are stagnant water, oxidation processes, unstable soil and vehicles that exceed capacity. The water in question is generally fresh water, but how does it affect if the water in question is seawater. The aim of the study was to determine the efforts to increase the stability of the AC-WC mixture by partially replacing the filler using shell ash with seawater immersion. The research was carried out in several stages including testing the quality of the material, determining the KAO variations of shell ash 4%, 6% and 8% of the filler weight, followed by immersion in seawater for 24 hours, using the Marshall test method, finally conducting an analysis discussing drawing conclusions. The stability value at a percentage of 4% is 1337.2 kg, for a percentage of 6% the stability value is 1497.2 kg, and the highest stability value is at an 8% percentage of 1531.3 kg. The increase occurs because the shells contain CaCO3 which has a positive effect on the voids in the asphalt getting smaller and the mixture getting denser. The flow value decreased with increasing percentage of shell ash, this is because the shell ash has a higher specific gravity than fine aggregate so that the asphalt covering the aggregate is thinner and causes melting to decrease. For flow in the mixture of shell ash, the percentage of 4% and 6% is 2.3 mm, the lowest value is in the percentage of 8%, which is 2 mm. Keywords: Shell Ash; Sea water; Fillers; Marshall, stability]]>
Copyrights © 2023
