<![CDATA[The brake block in the railway bogie system is an important component in supporting the operational safety of trains, so it needs to be inspected to determine its performance and service life. A simulation-based study was conducted to predict the wear rate of railway brake block with oriented braking force (F = 25.66 kN - 29.54 kN) and different material types, namely grey cast iron with hardness 170 HBN and metallic composite with hardness 90 HRR. The method of the study was carried out by Finite Element Analysis (FEA) simulation and calculating the wear rate with the Archard wear equation to measure the comparison of the amount of wear volume that occurs on the two materials. The results of the braking ability calculation can be concluded that the different types of brake block materials can affect the ability to decelerate during the deceleration process, causing differences in stopping mileage according to the type of material, such as gray cast iron (μ = 0.30) which has an average mileage of 15 metres and metallic composite (μ = 0.21) has an average mileage of 66 metres. The wear simulation results obtained are that the grey cast iron brake block has an average wear rate of 2,8285e-08 /s which is greater than the metallic composite which is only 1,5391e-08 /s. With this data, it can be concluded that oriented to the braking force load, the metallic composite brake block material has the advantage of a longer service life than grey cast iron.]]>
Copyrights © 2024
