<![CDATA[Geothermal is one of the renewable energies that is intensively developed during the energy transition. Indonesia is a country with the second largest geothermal potential in the world with a geothermal potential of 23,765.5 Mwe. The M.M.S.C.F field is classified as a volcanic geothermal system with liquid dominated developed with binary cycle technology. The use of conventional working fluid in binary cycle has low energy efficiency. Geothermal nanofluids particles consist of 2 or more nano-sized particles (1-100 nm), these particles are suspended and dissolved in the base fluid which can improve thermal conductivity and accelerate heat transfer in the heat exchanger. However, this technology has disadvantages including large Capital Expenditure (CAPEX) costs. This research applies CuO - Al2O3 to increase energy efficiency in heat exchangers directly proportional to the increase in thermal conductivity. The method used in this research is quantitative analysis by comparing economic indicators when using a conventional binary cycle system with a hybrid nanoparticle fluids binary cycle system in the M.M.S.C.F field heat exchanger and qualitative analysis based on previous literature studies. This technology has the advantage of increasing the heat transfer rate due to the increase in thermal conductivity value, the hybrid nanoparticle fluids thermal conductivity value is 0.79 W/m˚C when compared to the base fluid of 0.56 W/m˚C which has an increase of 23%. Based on the calculation of economic indicators, the payout time (POT) value as well as PI, IRR, and NPV of this technology are more positive than the conventional binary cycle. The effects of this research will be useful for the industry to improve the efficiency of the binary cycle.]]>
Copyrights © 2024
