Serambi Engineering
Vol. 10 No. 3 (2025): Juli 2025

Pengaruh Komposisi Bahan Bakar Oli Bekas dan Minyak Goreng Bekas Terhadap Suhu Pembakaran Pada Kompor Bertekanan

Harita Nurwahyu Chamidy (Unknown)



Article Info

Publish Date
27 Jun 2025

Abstract

The management of waste has become a increasingly intricate matter due to the rising volume of household waste. The present study evaluates the effect of the composition of a mixture of used oil and used cooking oil as an alternative fuel on the combustion temperature in a steam pressurized stove. Four distinct variations of fuel composition were meticulously executed: 300:0, 150:150, 50:250, and 0:300. These variations were then subjected to rigorous testing, entailing the measurement of temperature at the steam output chimney section at five-minute intervals for a duration of 40 minutes. The findings indicated that augmenting the quantity of cooking oil in the mixture led to a reduction in combustion temperature. The highest recorded temperature was attained at a composition of 300:0 (pure used oil), reaching 680°C, while the lowest temperature was observed at a composition of 0:300, with a temperature of 275°C. A subsequent analysis of variance (ANOVA) revealed a statistically significant disparity in the average combustion temperatures of the distinct fuel compositions (p-value < 0.05). The composition of the pure used oil, characterized by its high hydrocarbon content and calorific value, yielded a combustion process that was more efficient and stable. In contrast, cooking oil exhibited a lower combustion efficiency. The present study lends support to the utilization of liquid waste as an alternative fuel, a practice that has the dual benefits of reducing waste volume and producing useful by-products, including heat energy and gas.

Copyrights © 2025






Journal Info

Abbrev

jse

Publisher

Subject

Earth & Planetary Sciences Energy Engineering Environmental Science Industrial & Manufacturing Engineering

Description

The Serambi Engineering journal is published as a medium to distribute information on research results in engineering and science, both carried out by lecturers from the Serambi Mekkah University and other parties. Published research can be in the form of field research or laboratory research as ...