<![CDATA[Brushless DC (BLDC) motors require accurate rotor position feedback to guarantee reliable electronic commutation. However, hall-effect sensor signals are often degraded by high-frequency switching noise from the inverter, which can cause false commutations and control errors. Moreover, a direct connection to control hardware may introduce ground loops and jeopardize sensitive electronics. This study proposes a hardware-based hall signal conditioning method that integrates RC low-pass filters, designed with a 1.59 kHz cutoff frequency, to attenuate inverter-induced noise, and 4N35 optocouplers to provide galvanic isolation. Unlike existing approaches that rely primarily on algorithmic noise rejection or digital filtering, the proposed solution offers a compact, low-latency hardware implementation suitable for real-time embedded control. Experimental validation using a dSPACE DS1104 board shows a 14.7 dB improvement in signal-to-noise ratio (SNR) and a 36% reduction in timing jitter, ensuring clean and isolated hall signals for stable six-step commutation. These improvements directly translate into smoother torque production, enhanced speed stability, and increased protection of control electronics, making the method applicable to both research and industrial BLDC motor systems operating in noisy environments.]]>
Copyrights © 2026
