<![CDATA[The shaft is a crucial component in mechanical systems because it serves to transfer power and rotational motion throughout the machine. This research aims to assess the structural strength and operational performance of shafts used in a tire shredding machine through numerical simulation methods in order to achieve a safe and efficient design. The study involved several stages, including the development of shaft geometry models, the determination of boundary conditions, load application, mesh generation, and stress analysis using the finite element method. Two shaft configurations were examined: a 59 mm diameter shaft made from AISI 1045 steel and a 49 mm diameter shaft manufactured from ASTM A36 steel. The simulation results indicate that the 59 mm shaft experiences a Von Mises stress of 8.9 × 10⁻⁵ MPa, with a maximum displacement of 0 mm and a safety factor of 15. Similarly, the 49 mm shaft shows a Von Mises stress of 8.4 × 10⁻⁵ MPa, no measurable displacement, and a safety factor of 15. These findings confirm that both shaft designs are capable of safely withstanding the applied working loads. In addition, cutting system tests revealed that a 24-tooth blade achieved an efficiency of 26.9%, while a 40-tooth blade reached only 22.3%, indicating that the 24-tooth configuration provides better performance.]]>
Copyrights © 2026
