<![CDATA[Problems faced in the need for nails in the furniture industry, and various civil engineering works, which are uniform and standard sizes. The production objective is to obtain nails with a diameter of 5 x 50 mm, which are not easily rusted, with uniform and standard sizes. Production methods include: nail design with dimensions of 5 x 50 mm diameter; preparation of low carbon steel wire, AISI 1020, diameter 5 mm in the form of a coil with a diameter of 600 mm; straightening the steel wire coil through a die; cutting the tip of the pointed shape into a length of 50 mm; forming the nail head (haeding) with a head diameter of 8 mm and a head thickness of 1.5 mm; coating by dipping into molten zinc (hot dip galvanized) at a temperature of 500oC for 30 seconds; and quality control on shape, straightness, and dimensions. The production results are nails with a diameter of 5 x 50 mm which are rust-resistant, uniform and standard in size with a production cost of IDR 24,000/kg, a production process duration of 6 minutes/kg which has an impact on being used in construction, the furniture industry, and various civil engineering works wood, plastic, composites, thin metal plates, walls.]]>
Copyrights © 2026
