<![CDATA[Limited storage space for clothes in modern residences, such as boarding houses and apartments, often creates practical problems in daily life. This study aimed to design and manufacture a 90° S-shaped clothes hanger made of steel that can be securely mounted on the top edge of a 38 mm-thick door leaf. The manufacturing process included designing the hanger, cutting a steel plate measuring 210 × 20 × 2 mm, shaping both ends into semicircles, smoothing sharp edges, marking bending lines, performing sequential bending operations, applying surface finishing through painting or chromium/nickel plating, and conducting quality and dimensional inspections. The final product was a durable steel clothes hanger with a 90° S-shaped configuration that can be easily installed on room or bathroom doors without requiring holes or permanent modifications. Testing results showed that the hanger could support loads of up to 6 kg while maintaining structural integrity. The manufacturing cost was approximately IDR 9,500 per unit, with a production time of about 3 minutes per piece. These results indicate that the developed hanger provides a practical, portable, and cost-effective solution for increasing clothing storage capacity in limited residential spaces while preserving the condition of the door surface.]]>
Copyrights © 2026
