The U-6Zr alloys, considered as nuclear fuel, must endure mechanical, thermal, and corrosive loads. Corrosion resistance is crucial during reactor operation and storage, as environmental conditions can trigger material degradation. Niobium (Nb) addition is expected to suppress corrosion. The U-6Zr-xNb alloys (x = 0, 1, 4, and 7 wt.%) were fabricated using arc melting and tested in acidic and alkaline environments. XRD analyses before corrosion revealed that the x = 0 and 1 wt.% alloys consisted of a single α-U phase, while the x = 4 wt.% alloy showed both α-U and γ-U phases. At x = 7 wt.%, only the α-U phase was present. After corrosion, XRD showed the formation of α-U and UO₂ phases for x = 0 and 1 wt.%, α-U, γ-U, and UO₂ phases for x = 4 wt.%, and only the α-U phase for x = 7 wt.%. Electrochemical tests demonstrated that E_corr increased and the corrosion rate (CR) decreased with increasing Nb content. Thus, Nb effectively enhanced the corrosion resistance of the U-6Zr alloys. Among all compositions, the U-6Zr-7Nb alloy showed the lowest corrosion rate and highest corrosion resistance in both environments, suggesting its strong potential as a nuclear fuel candidate.
Copyrights © 2026