The tire cord manufacturing industry requires large amounts of water, including for adhesive dipping using Resorcinol-Formaldehyde-Latex (RFL), and generates wastewater that must be treated before discharge or reuse. This study evaluated the performance of the wastewater treatment plant (WWTP) and the suitability of treated water for hygiene-sanitation and production processes at a large-scale tire cord manufacturing facility in Indonesia. A descriptive-evaluative case study was conducted with six sampling events (n = 6) between January and March 2024. The treatment system comprised equalization, neutralization, aeration, sedimentation, coagulationflocculation using Poly Aluminium Chloride (PAC) and anionic polymer, sand filtration, activated carbon filtration, and reverse osmosis (RO). Physicochemical and microbiological parameters, including hardness and iron, were analyzed in the final effluent and the further-treated water. Removal efficiency was used as the main indicator of process performance, whereas standard deviation (SD) and coefficient of variation (CV) were used to assess data dispersion, compliance margin, and output stability. The effluent complied with applicable standards, with COD, BOD, and TSS removal efficiencies of 84.78%, 84.65%, and 89.21%; the CV of TSS decreased from 36.7% (influent) to 13.2% (effluent), whereas the effluent CVs of COD and BOD (23.0% and 22.9%) indicated fluctuations that still need to be controlled. The further-treated water met hygiene-sanitation standards and showed an initial indication of suitability for production process water based on the tested parameters. The system represents partial water reuse; unused effluent and RO reject still require management and therefore cannot be categorized as zero liquid discharge (ZLD).
Copyrights © 2026