Civil Engineering Collaboration
Vol. 10 (2025) No. 2

Experimental Study on the Use of Palm Oil Ash as an Additive to Improve the Compressive Strength of Concrete

Rachels Br. Bukit (Universitas Al-Azhar Medan)



Article Info

Publish Date
30 Oct 2025

Abstract

The utilization of biomass waste as an additive in concrete serves as a strategy to reduce cement consumption, thereby lowering carbon emissions. This study examines the effect of palm oil ash on the compressive strength of concrete designed for a target strength (f’c) of 26.4 MPa. The ash was added at proportions of 0%, 5%, 10%, and 15% by weight of cement. For each variation and testing age (7 and 14 days), three 15 x 30 cm cylindrical specimens were prepared, resulting in a total of 24 specimens. Mix design followed the RSNI T-13-2002 standard, while compressive strength testing was conducted in accordance with SNI 1974:2011. The slump values ​​for all mixes (110–125 mm) fell within the target range of 100–140 mm. The 5% ash variation yielded the highest average compressive strength—18.07 MPa at 7 days and 22.18 MPa at 14 days—representing an increase of 9.8% and 16.6%, respectively, over the control (normal) concrete (16.45 MPa and 19.03 MPa). The 10% and 15% variations did not outperform the control concrete. The superiority of the 5% variation cannot yet be considered statistically significant due to the wide dispersion of data among the specimens; furthermore, none of the mixes reached the target f’c at 14 days. Further testing at 28 days and characterization of the ash are required to substantiate these findings.

Copyrights © 2025






Journal Info

Abbrev

jcivil

Publisher

Subject

Civil Engineering, Building, Construction & Architecture Control & Systems Engineering Electrical & Electronics Engineering Industrial & Manufacturing Engineering Mechanical Engineering

Description

Civil Engineering Collaboration is an open-access peer reviewed journal that mediate the result of study, research and development of science and technology in Civil Engineering with scope: 1. Civil and Structural Engineeering 2. Earthquake Engineering 3. Surveying and Geo-Spatial Engineering 4. ...