Indonesian Journal of Engineering and Technology (INAJET)
Vol. 9 No. 1 (2026): September 2026

Compressive Performance of Steel Fibre Reinforced Concrete-Filled Plastic Tubes

Jen Hua Ling (University of Technology Sarawak)
Eric Kiing Hung Wong (University of Technology Sarawak, Malaysia)



Article Info

Publish Date
30 Oct 2026

Abstract

This study investigates the compressive strength behaviour of concrete specimens with varying diameters (75 mm, 100 mm, and 150 mm), steel fibre contents (0%, 0.75%, and 1.5%), and confinement conditions using PVC tubes. A total of 54 cylindrical specimens were prepared across four groups: plain concrete (C), fibre-reinforced concrete (FC), plain concrete with PVC confinement (TC), and fibre-reinforced concrete with PVC confinement (TFC). Results showed that compressive strength increased with specimen diameter due to a fourfold increase in cross-sectional area and reduced slenderness (h/d ratio), with strength gains ranging from 4.3 to 5.4 times for unconfined specimens and 3.5 to 4.1 times for confined ones. However, in PVC-confined specimens, a decreasing 2t/d ratio with increasing diameter limited the confinement effectiveness. Steel fibres showed inconsistent effects on strength, likely due to poor workability and uneven distribution. PVC confinement generally enhanced compressive strength, particularly at 1.5% fibre content, with increases of 64%, 58%, and 45% for specimens with diameters of 75 mm, 100 mm, and 150 mm, respectively. Observed failure modes included bulging, shear, and tube bursting. Bulging was associated with more effective confinement. These findings highlight the importance of jointly considering geometric scaling and material parameters in the design of confined fibre-reinforced concrete elements.

Copyrights © 2026






Journal Info

Abbrev

inajet

Publisher

Subject

Civil Engineering, Building, Construction & Architecture Computer Science & IT Electrical & Electronics Engineering Engineering Mechanical Engineering

Description

Indonesian Journal of Engineering and Technology (INAJET) is a scientific journal that publishes peer-reviewed research papers in the fields of Engineering and Technology, both theoretical, experimental, and application studies, including: Electrical Engineering, Mechanical Engineering, Informatics, ...