Trends in Mechanical Engineering Research
2026: ARTICLE IN PRESS

L9 GEOMETRIC SCREENING OF AN S1046 DARRIEUS WIND TURBINE USING QBLADE

Erwin Erwin (Jurusan Teknik Mesin, Fakultas Teknik, Universitas Sultan Ageng Tirtayasa)
Tonang Dwi Nugroho (Jurusan Teknik Mesin, Universitas Sultan Ageng Tirtayasa)



Article Info

Publish Date
27 Oct 2026

Abstract

Vertical-axis wind turbines have been considered for distributed generation, yet the performance of lift-driven Darrieus rotors has remained sensitive to rotor geometry and operating tip-speed ratio. This study screened the combined effects of blade height, chord length, and rotor radius on an S1046 Darrieus rotor developed from the Sultan Wind Turbine v4.5 numerical baseline. A three-factor, three-level L9 orthogonal array generated nine geometries, which were evaluated in QBlade Win v0.96.3 at seven sampled tip-speed ratios between 0.01 and 3.01. The maximum sampled power coefficient, the corresponding sampled tip-speed ratio, the trapezoidal area under the sampled power-coefficient curve, and descriptive factor-level differences were compared. The baseline produced a maximum sampled power coefficient of 0.294 at a tip-speed ratio of 2.01. Variant 7, defined by a blade height of 2.2 m, a chord length of 0.17 m, and a rotor radius of 0.32 m, produced the largest value, 0.544 at a tip-speed ratio of 2.51, representing an 85.2% increase relative to the baseline under the common simulation setup. Its curve-area index was 39.5% greater than the baseline value. Height and chord displayed the largest level ranges within the unreplicated matrix, whereas radius showed a smaller averaged main effect. The results identified Variant 7 as the strongest candidate among the nine simulated geometries, but not as a validated physical optimum. Independent reconstruction of the QBlade model, Reynolds-number-specific polar documentation, refined tip-speed-ratio sampling, uncertainty analysis, structural assessment, and experimental confirmation remained necessary before prototype adoption.

Copyrights © 2026






Journal Info

Abbrev

timer

Publisher

Subject

Chemical Engineering, Chemistry & Bioengineering Civil Engineering, Building, Construction & Architecture Control & Systems Engineering Electrical & Electronics Engineering Industrial & Manufacturing Engineering

Description

TiMER: Trends in Mechanical Engineering Research is a blind-peer-review journal. TiMER mainly focuses on Mechanical Engineering fields. Detailed scopes of articles accepted for submission to TiMER are Renewable Energy, Sustainability, and Environmen; Fuel Technology; Material Mechanics; Biomaterial; ...