KP-02 and KP-04 provide sand traps and sediment excluders primarily intended for non-cohesive sediment, whereas many irrigation systems carry predominantly silt and clay. This study evaluates existing structures and develops a modified Silt Settler concept for cohesive sediment using field evidence, numerical modeling, and physical model validation. Samples downstream of the Warujayeng sediment excluder contained 74.6–75.0% silt and 21.0–21.8% clay. At Tami Weir, cohesive fractions in bed sediment reached 77–100%, with TSS concentrations of 130–270 mg/L. HEC-RAS 2D modeling showed that sediment concentration in the existing sand trap decreased from 380–427 mg/L to approximately 150 mg/L, but fine sediment continued to enter the main canal. Two four-channel Silt Settler alternatives were simulated using FLOW-3D Hydro and evaluated against Krone deposition and Partheniades erosion thresholds. At a settling discharge of 5.0 m³/s, the deposition-opportunity index was 0.48% for Alternative 2A and 0.02% for Alternative 2B. The inlet baffle in Alternative 2A increased the projected index to 56.4–58.0%. Validation using a 1:5 physical model produced MAPE values of 6.43% for water level and 12.50% for velocity. The results support Alternative 2A with an inlet baffle and measurable cohesive-sediment criteria for updating KP-04
Copyrights © 2026