Occupational Safety and Health (OSH) requires continuous monitoring of Personal Protective Equipment (PPE) compliance, while manual supervision is limited by coverage, continuity, and human observation. This study evaluates an edge-based PPE monitoring prototype using YOLOv8n on a Raspberry Pi 4 for detecting six PPE classes: helmet, safety glasses, mask, safety vest, gloves, and safety shoes. The system uses a 2K QHD autofocus USB camera mounted on a static tripod and integrates object detection with a tiered SOP decision module and physical warning output. Model performance was evaluated using precision, recall, F1-score, Average Precision (AP), mean Average Precision (mAP), FPS, and inference time. Field evaluation included six initial test frames, distance tests at 3-5 m with frontal and side orientations, additional testing at 2 m, a dedicated safety-glasses test at approximately 1 m, and a qualitative indoor test. The model achieved an overall mAP@0.5 of 0.737. Helmet, safety vest, and safety shoes showed the strongest AP@0.5 values, whereas smaller or less visually distinct PPE classes remained more difficult to detect. Edge deployment achieved 8.4-11.6 FPS with inference times of 86.1-119.3 ms. Across the six initial test frames, five SOP decisions were correct, resulting in 83.3% decision accuracy and a 16.7% false alarm rate. The results demonstrate the feasibility of limited real-time PPE monitoring on Raspberry Pi 4 while showing that reliability remains sensitive to object size, distance, viewpoint, and occlusion.
Copyrights © 2026