METAL : Jurnal Sistem Mekanik dan Termal
Vol. 10 No. 2 (2026): METAL: Jurnal Sistem Mekanik dan Termal

The Mechanical and Failure Characterization of Vacuum-Infused Carbon/Glass/CSM Hybrid Laminates

Ilhamdi Oyon (Universitas Andalas)
Bagus Fadli Wahyu Stiawan (Universitas Andalas)
Hendri Hestiawan (Universitas Andalas)
Dony Hidayat (Universitas Andalas)



Article Info

Publish Date
30 Oct 2026

Abstract

The increasing demand for lightweight structures in Unmanned Aerial Vehicles (UAVs) necessitates composite materials that provide an optimal balance between structural stiffness and damage tolerance. This study experimentally investigates the mechanical performance and macroscopic failure behavior of a vacuum-infused seven-layer Carbon/Glass/CSM hybrid laminate with a [C/G/CSM/C/G/CSM/C] stacking sequence, using a monolithic Carbon Fiber Reinforced Polymer (CFRP) laminate as the benchmark. Tensile testing was performed following ASTM D3039 data evaluation using ASTM D638 Type I dog-bone specimens, while three-point bending tests were conducted in accordance with ASTM D790. The hybrid laminate achieved average tensile and flexural strengths of 395.6 MPa and 294.1 MPa, respectively, compared with 610.6 MPa and 443.9 MPa for the benchmark CFRP laminate. The hybrid laminate also exhibited a flexural modulus of 32.2 GPa with a flexural strain at break comparable to that of the benchmark laminate (approximately 0.8%). Under tensile loading, both laminate systems exhibited predominantly brittle behavior. In contrast, under flexural loading, the hybrid laminate demonstrated a progressive pseudo-ductile response characterized by a sawtooth-shaped post-peak stress response, an extended load plateau, sustained load-carrying capability, and spring-back recovery, whereas the benchmark CFRP laminate exhibited abrupt post-peak failure. Macroscopic observations further revealed that hybrid laminate failure was governed by carbon fiber fracture accompanied by fiber pull-out, fiber bridging, localized edge delamination, and matrix fragmentation. These findings indicate that, although hybridization reduced the ultimate mechanical strength, the proposed stacking sequence improved progressive damage tolerance under flexural loading, making the laminate a promising candidate for lightweight secondary UAV structural components where controlled damage progression is desirable.

Copyrights © 2026






Journal Info

Abbrev

metal

Publisher

Subject

Automotive Engineering Industrial & Manufacturing Engineering Materials Science & Nanotechnology Mechanical Engineering

Description

METAL: Jurnal Sistem Mekanik dan Termal translated as METAL: Journal of Systems in Mechanical and Thermal is a scholarly peer-reviewed journal published by Mechanical Engineering Department of Engineering Faculty at Universitas Andalas, Padang, Indonesia. The journal focused on the mechanics and ...