In the development of technology and business competition today, companies are required to make breakthroughs to improve the quality of the products they produce in order to survive in today's highly competitive business world. Companies can compete in the industry by providing good quality products according to specifications and free of defects. The DMAIC (Define, Measure, Analyze, Improve, Control) concept of the Six Sigma method can be used to strive for zero-defect levels. The Define stage is used to identify the problems that occur, the Measure stage is carried out to measure the level of defects in production, the Analyze stage is used to determine the causes of the problems in the production process using a fishbone diagram, the Improve stage is used to improve the process and eliminate the causes of defects based on the Analyze stage, and the last stage, Control, is used to control performance and ensure that the main causes of defects do not appear again using Statistical Process Control (SPC). This research aims to determine the defect control of Sandchoco biscuit products at PT. XYZ using the Six Sigma method. The results show that during the production process of Sandchoco biscuits, four factors cause defects: Outer, Inner, GB, and Carton, with Outer being the most dominant. The comparison of Outer defects before and after improvement shows that the quantity decreased from 18,909 pcs (January-April 2025) to 10,140 pcs (June-September 2025), a reduction of 8,769 pcs or 46.37%. The sigma value also increased from 4.55 to 4.66, indicating that the Six Sigma concept was successfully applied in this research.
Copyrights © 2026