Epoxy composites reinforced with natural or synthetic fibers have attracted considerable attention as lightweight engineering materials. However, their mechanical performance depends on reinforcement content and requires systematic evaluation. This study investigated the tensile and compressive behavior of epoxy composites reinforced with E-glass fiber at contents of 10, 20, and 30 wt.%, corresponding to epoxy-to-reinforcement ratios of 90:10, 80:20, and 70:30, respectively. Tensile and compressive tests were conducted using a universal testing machine in accordance with ASTM D3039 and ASTM D695, respectively. The mean tensile strength increased from 48.02 ± 17.39 MPa at 10 wt.% E-glass fiber to 59.12 ± 10.19 MPa at 20 wt.% and 70.45 ± 5.36 MPa at 30 wt.%. However, one-way analysis of variance showed that these differences were not statistically significant at the 5% significance level (p = 0.154). The compression curves showed different load–deformation responses across the reinforcement contents, but compressive strength could not be compared quantitatively because the numerical stress scale and units in the available figures could not be verified. Overall, tensile strength showed an increasing trend with increasing E-glass fiber content, although this trend was not statistically significant. Further evaluation using verified compressive data and additional mechanical and material characterization is needed to establish the suitability of these composites for specific engineering applications.
Copyrights © 2026