Motorcycle engine oil condition is essential for maintaining engine performance and preventing excessive component wear. Conventional oil replacement indicators commonly rely on mileage or service intervals and do not represent actual oil condition during operation. This study proposes a low-cost Internet of Things (IoT)-based monitoring system that uses oil temperature and RPM response as indirect indicators of oil condition rather than directly measuring oil viscosity. The system integrates a K-type thermocouple with a MAX6675 module, a DC motor and propeller mechanism, an optocoupler sensor, Arduino Uno R3, ESP32, and the Blynk IoT platform. Experimental testing included sensor calibration and validation, oil loading tests, and IoT monitoring and notification tests. The temperature measurement showed an average absolute error of 0.94°C, while the RPM measurement using the optocoupler showed an average error of approximately 1.61%. The oil loading test showed that the developed prototype could identify changes in rotational resistance through RPM response, with 7140 RPM used as the experimental threshold for the tested oil condition. Monitoring data were transmitted to the Blynk platform at 1-second intervals with warning notifications provided through the application and email. The results demonstrate the feasibility of RPM response as an indirect oil condition indicator for a low-cost IoT monitoring system. Further validation using standard viscosity measurements and oil samples with different degradation levels is therefore required.
Copyrights © 2026