Aluminum alloy 6201 (AA 6201) is widely used in electrical applications due to its excellent electrical conductivity and lightweight characteristics. To enhance its industrial applicability and added value, dissimilar joining between AA 6201 and copper has attracted considerable interest, particularly for electrical connector systems. In this study, rotary friction welding was employed as a solid-state joining technique capable of producing high-quality dissimilar metal joints while minimizing defects commonly associated with fusion welding processes. However, the formation of intermetallic compounds at the Al/Cu interface remains a critical issue, as these phases may improve joint strength but simultaneously deteriorate electrical conductivity. This research comprehensively investigates the effect of rotary friction welding parameters on the mechanical strength and electrical resistance of AA 6201/Cu dissimilar joints. Friction time was varied to evaluate their influence on joint characteristics and plastic deformation, as indicated by the amount of aluminum metal transferred to the copper surface. Moreover, the joints exhibited excellent mechanical performance, achieving a joint efficiency of up to 100%. Electrical resistance measurements showed that the Al/Cu joint exhibited lower electrical resistance, corresponding to higher electrical conductivity than the AA 6201 base metal, with the electrical resistance reduced by up to 60%.
Copyrights © 2026