Jurnal Polimesin
Vol 24, No 5 (2026): October

Microstructure and crystallinity characterization of graphite from petroleum coke for generation IV nuclear reactor material applications

Syaiful Arif (Department of Mechanical Engineering, Faculty of Engineering, Andalas University)
Gunawarman Gunawarman (Department of Mechanical Engineering, Faculty of Engineering, Andalas University)
Syaiful Bakhri (Nuclear Energy Research Organization, National Research And Innovation Agency)
Deni Mustika (Nuclear Energy Research Organization, National Research And Innovation Agency)
Kusnanto Kusnanto (Nuclear Engineering, Gadjah Mada University)
Maman Kartaman Ajiriyanto (Nuclear Energy Research Organization, National Research And Innovation Agency)



Article Info

Publish Date
30 Oct 2026

Abstract

This study aims to analyze the effect of particle size on the microstructural evolution and chemical transformation of petroleum coke as a graphite material precursor for Generation IV nuclear reactor applications. Samples were prepared in two size variations, namely 5 mm and 100 mm, then subjected to thermal treatment at a temperature of 800 °C with a heating rate of 5 °C/min and a holding time of 2 hours in confined atmospheric conditions. Characterization was carried out using Scanning Electron Microscopy (SEM) at magnifications of 500×, 1500×, and 3000× and Fourier Transform Infrared (FTIR) in the range of 4000–400 cm⁻¹. The SEM results showed morphological evolution from an amorphous structure to a layered (lamellar) structure; however, the layer orientation remained irregular, and the material was still classified as turbostratic carbon. The presence of porosity and microcracks indicates that the devolatilization process has not been followed by adequate densification. FTIR analysis shows a decrease in hydroxyl (–OH) and aliphatic C–H functional groups and the appearance of aromatic C=C bonds, indicating the occurrence of initial aromatization, but not yet reaching a perfect graphitic structure. Comparison of particle sizes showed that the 5 mm sample underwent a more advanced transformation than the 100 mm sample, although the transformation remained inhomogeneous because of uneven heat distribution. The results indicate that particle size is a key parameter in the carbonization and graphitization processes. Petroleum coke shows potential as a graphite precursor; however, the process conditions used do not meet the specifications for nuclear graphite. An increase in graphitization temperature, particle size control, and further processes such as densification are required to achieve a more regular and stable crystalline structure.

Copyrights © 2026






Journal Info

Abbrev

polimesin

Publisher

Subject

Automotive Engineering Control & Systems Engineering Engineering Materials Science & Nanotechnology Mechanical Engineering

Description

Polimesin mostly publishes studies in the core areas of mechanical engineering, such as energy conversion, machine and mechanism design, and manufacturing technology. As science and technology develop rapidly in combination with other disciplines such as electrical, Polimesin also adapts to new ...