Teknomekanik
Vol. 9 No. 3 (2026): Regular Issue

Effects of loading angle and build direction on the tensile behavior of WAAM steel produced with ER70S-6 welding wire

Nguyen Thien Nhut (Faculty of Mechanical Engineering, Vinh Long University of Technology Education, Viet Nam)
Nguyen Tan No (Faculty of Mechanical Engineering, Vinh Long University of Technology Education, Viet Nam)
Cao Le Anh Kiet (Faculty of Mechanical Engineering, Vinh Long University of Technology Education, Viet Nam)
Nguyen Van Cuong (Faculty of Mechanical Engineering, University of Transport and Communications, Viet Nam)



Article Info

Publish Date
19 Oct 2026

Abstract

This study investigates the effects of loading angle and build direction on the tensile properties of components fabricated through wire arc additive manufacturing (WAAM) fabricated using ER70S-6 steel. Tensile tests were conducted at four loading angles (0°, 45°, 60°, and 90°) for two build directions (flat and upright). For each loading angle and build direction, two tensile specimens were tested, and the reported values were obtained from a representative specimen for each testing condition. The results reveal that the WAAM-fabricated specimens exhibited pronounced mechanical anisotropy, with the highest tensile strength obtained when the applied load is parallel to the bead direction, followed by a considerable reduction at other loading angles. For the upright build direction, the ultimate tensile strength decreased by approximately 47% at 450 relative to that at 0°, suggesting a possible contribution from interlayer shear stresses and delamination-related failure mechanisms. An empirical model was proposed to describe the dependence of tensile strength on the loading angle, enabling the quantitative evaluation of the role of different stress components. The flat build direction exhibited more stable mechanical behavior and a lower degree of anisotropy. In addition, hardness measurements showed that the variation in hardness was mainly governed by the build direction rather than the loading angle. The obtained results provide further insight into the relationship among layered structure, stress state, and mechanical properties, thereby supporting the design and application of WAAM structures subjected to multidirectional loading conditions.

Copyrights © 2026






Journal Info

Abbrev

teknomekanik

Publisher

Subject

Mechanical Engineering

Description

Teknomekanik is an international journal that publishes peer-reviewed research in engineering fields (miscellaneous) to the world community. Paper written collaboratively by researchers from various countries is encouraged. It aims to promote academic exchange and increase collaboration among ...