Jurnal Ampere
Vol 3, No 1 (2018): JURNAL AMPERE

KARAKTERISTIK KABEL YANG DI TEKUK SAAT DI ALIRI ARUS

Emidiana, Emidiana ( Program Studi Teknik Elektro Fakultas Teknik Universitas PGRI Palembang)
Widodo, Matra ( Program Studi Teknik Elektro Fakultas Teknik Universitas PGRI Palembang)



Article Info

Publish Date
30 Jun 2018

Abstract

   In the installation of electrical wiring, both installations for housing, offices and industry, the cables sometimes have to be bent. This cable bending will affect cable characteristics, one of which changes the cable resistance value. This study will discuss the effect of cable bending on the value of resistance. Data is taken by experimenting with a voltage and current flowing on a cable that is not bent and with a cable that is bent once, twice, thrice, four times and five times bending. From the results of the test, the calculation is obtained and the following results are obtained: for cables that are not bent, the resistance value is 900 Ohm / km. The cable is bent once, the resistance value is 600 Ohm / km. Whereas for cables that are bent twice at 700 Ohm / km, they are bent three times to 550 Ohm / km, four times 700 Ohm / km and five times 560 Ohm / km. The up and down measurement results occur because the bending direction is not always in the same direction. ABSTRAK Pada pemasangan kabel instalasi listrik, baik instalasi untuk perumahan, perkantoran maupun industry, kabelnya kadang-kadang harus ditekuk. Penekukan kabel ini akan mempengaruhi karakteristik kabel, salah satunya merubah nilai tahanan kabel. Penelitian ini akan membahas mengenai pengaruh tekukan kabel terhadap nilai tahanan. Data diambil dengan melakukan eksperimen dengan mengalirkan tegangan dan arus pada kabel yang tanpa di ditekuk dan  dengan kabel yang ditekuk dengan satu kali, dua kali, tiga kali, empat kali dan lima kali tekukan. Dari hasil pengujian tersebut dilakukan perhitungan dan didapat hasil sebagai berikut : untuk kabel yang tidak ditekuk, nilai tahanannya adalah 900 Ohm/km. Kabel yang ditekuk satu kali, nilai tahanannya adalah 600 Ohm/km.   Sedangkan untuk kabel yang ditekuk dua kali tahanannya 700 Ohm/km, ditekuk tiga kali tahannanya menjadi 550 Ohm/km, empat kali 700 Ohm/km dan lima kali 560 Ohm/km. Hasil pengukuran yang naik turun tersebut terjadi karena arah tekukan yang tidak selalu searah.   

Copyrights © 2018






Journal Info

Abbrev

ampere

Publisher

Subject

Computer Science & IT Control & Systems Engineering Electrical & Electronics Engineering Engineering

Description

Jurnal Ampere, The aim of this journal is to publish articles to all aspects of the latest outstanding developments in the field of Electrical Engineering. Power Systems ·Generator ·Power Distribution ·Electrical Power Convertion ·Protection Systems ·Electrical Materials ·Newreble ...