Garuda - Garba Rujukan Digital

All

Reaktor

reaktor
Website

Published by Universitas Diponegoro

ISSN : 08520798 EISSN : 24075973 DOI : https://doi.org/10.14710/reaktor.xx.x.xx-xx

Chemical Engineering, Chemistry & Bioengineering Control & Systems Engineering Energy Materials Science & Nanotechnology

Reaktor invites contributions of original and novel fundamental research. Reaktor publishes scientific study/ research papers, industrial problem solving related to Chemical Engineering field as well as review papers. The journal presents paper dealing with the topic related to Chemical Engineering including: Transport Phenomena and Chemical Engineering Operating Unit Chemical Reaction Technique, Chemical Kinetics, and Catalysis Designing, Modeling, and Process Optimization Energy and Conversion Technology Thermodynamics Process System Engineering and products Particulate and emulsion technologies Membrane Technology Material Development Food Technology and Bioprocess Waste Treatment Technology

Arjuna Subject : Teknik (semua kategori) - Teknik (Lain-Lain)

Articles 7 Documents

Search results for , issue "Volume 19 No. 2 June 2019" : 7 Documents clear

Study on Particle Swarm Optimization Variant and Simulated Annealing in Vapor Liquid Equilibrium Calculation Rama Oktavian; Agung Ari Wibowo; Zuraidah Fitriah
Reaktor Volume 19 No. 2 June 2019
Publisher : Dept. of Chemical Engineering, Diponegoro University

Phase equilibrium calculation plays a major rule in optimization of separation process in chemical processing. Phase equilibrium calculation is still very challenging due to highly nonlinear and non-convex of mathematical models. Recently, stochastic optimization method has been widely used to solve those problems. One of the promising stochastic methods is Particle Swarm Optimization (PSO) due to its simplicity and robustness. This study presents the capability of particle swarm optimization for correlating isothermal vapor liquid equilibrium data of water with methanol and ethanol system by optimizing Wilson, Non-Random Two Liquids (NRTL), and Universal Quasi Chemical (UNIQUAC) activity coefficient model and also presents the comparison with bare-bones PSO (BBPSO) and simulated annealing (SA). Those three optimization methods were successfully tested and validated to model vapor liquid equilibrium calculation and were successfully applied to correlate vapor liquid equilibrium data for those types of systems with deviation less than 2%. In addition, BBPSO shows a consistency result and faster convergence among those three optimization methods. Keywords: Phase equilibrium, stochastic method, particle swarm optimization, simulated annealing and activity coefficient model

Utilization of Crude Intracellular Chitinase Enzyme from Providencia stuartii for Glucosamine Production from Shrimp Shells Hardoko Hardoko; Titri Siratantri Mastuti; Desy Puspasari; Yuniwaty Halim
Reaktor Volume 19 No. 2 June 2019
Publisher : Dept. of Chemical Engineering, Diponegoro University

Chitin hydrolysis using enzyme is one of the methods to produce glucosamine in shorter time compared to using microbial cells, but the ability to produce glucosamine at enzyme’s optimum condition is influenced by substrate concentration and fermentation time. The objective of this research was to determine the optimum substrate concentration and fermentation time of shrimp shells’ chitin to produce glucosamine at the optimum pH and temperature of crude intracellular chitinase enzyme from Providencia stuartii. Method used was experimental method, started by extraction of intracellular enzyme from P. stuartii, followed by determination of optimum pH and temperature of enzyme. The optimum condition was used for experiment of shrimp shells’ chitin fermentation with treatments of chitin substrate concentration (0.5; 1.0; 1.5; 2.0%) and fermentation time (2, 4, 6 and 24 hours). Results showed that optimum enzyme activity occurred at pH of 5.0 and temperature of 40oC, which was about 6.03 U/ml. Concentration of chitin substrate and fermentation time influenced the amount of glucosamine obtained. Fermentation of shrimp shells’ chitin using crude intracellular enzyme was optimum at 1.0% substrate concentration and 6 hours fermentation time, which produced glucosamine about 1680.06±58.49 ppm. Keywords: intracellular chitinase enzyme, glucosamine, shrimp shells’ chitin, P. stuartii

Solid Concentration Effect for Solvent Extraction Process of Oily Contaminated Soil Lely Fitriyani; Edwan Karadena; Sukandar Sukandar
Reaktor Volume 19 No. 2 June 2019
Publisher : Dept. of Chemical Engineering, Diponegoro University

Solvent extraction has been used as a method to wash oil content of oily contaminated soil in industry for years. Some solvents and temperature ranges has been chosen to increase the oil recovery rate of extraction process, however only few studies reported that it has been able to reach remaining Total Petroleum Hydrocarbon (TPH) less than 0.5% in less than 30 minutes. During the experiments, acetone and toluene chosen to extract oil content from contaminated soil by using solvent extraction process. Temperature selected were between 24°C up to 70°C. Mixing apparatus which has been utilized was centrifugation machine with 1000 rpm (1570 g) operational speed. Duration of treatment process was 10 minutes with some variations of solid to solvent ratio. During the experiments, it was observed that by using toluene and acetone as solvents, the optimum Total Petroleum Hydrocarbon (TPH) removal obtained at temperature 50°C. In the other hand, optimum solid to solvent ratio toluene ratio was 1:6. As a solvent acetone observed capable to reduce TPH content until below 0.5% as threshold limit for TPH of contaminated soil regulated by environmental regulation in Indonesia. During the experiments it was also observed the dependency of solid concentration (Cs) with dissociation coefficient (KD). In the other hand, heavy metal at the remaining extracted soil after soil washing was observed available in safe concentration to be discharged to the environment base on regulation in Indonesia. Keywords: solvent extraction, soil washing, contaminated soil, TPH, centrifugation, oil sludge, acetone, toluene, solid treatment.

The Impact of Combination of Ozonation and Ultrasonication Process on Morphological and Chemical Properties of κ-Carrageenan Nurfiningsih Nurfiningsih; Ratnawati Ratnawati; Aji Prasetyaningrum
Reaktor Volume 19 No. 2 June 2019
Publisher : Dept. of Chemical Engineering, Diponegoro University

Carrageenan application in the biomedical field is influenced by the size of molecular weight. Depolymerization process is needed for changing the high molecular weight (HMW) fraction of κ- carrageenan into low molecular weight fraction (LMW) of κ- carrageenan. Ozone is a powerful oxidant and considered for depolymerization of κ- carrageenan. This research was conducted as an investigation on the influence of the combination of ozonation and ultrasonication (OZ/US) on the chemical and morphological characteristics of κ-carrageenan. FTIR and Scanning electron microscopy (SEM) was used to determine the change of chemical and morphological characteristics of κ-carrageenan. The result of this study showed that there was no change of chemical properties of κ-carrageenan during OZ/US treatment. The sulfate content was obtained after OZ/US treatment tends to be stable. Nevertheless, the result of SEM analysis showed that there were changes on morphological characteristics of κ-carrageenan after OZ/US treatment. Keywords: ultrasonication, κ-carrageenan, ozonation, morphological, chemical

Nutritional Characteristics and Potential Applications of Flour Prepared from Indonesian Wild White Yam (Dioscorea esculenta L.) Diah Susetyo Retnowati; Ratnawati Ratnawati; Andri Cahyo Kumoro
Reaktor Volume 19 No. 2 June 2019
Publisher : Dept. of Chemical Engineering, Diponegoro University

Gembili or wild white yam (Dioscorea esculenta L.) is one of underutilized tubers that can be found during dry season in Indonesia and other Southeast Asian countries. Although it has been consumed as staple food by people for centuries during famine, no further studies have been conducted to explore its potentials in food applications. This work aims to study the preparation, characterization and potential analysis of Gembili flour for use as raw material in novel foods development. Creamy white flour was obtained from white yam tuber from milling and sieving of dried tuber chips. The flour has water content about 12.08%, which is acceptable for storage. No lipid was detected. In addition, the protein, ash, and fiber content of the flour were respectively 3.00%, 1.27%, and 9.04%. The carbohydrate and amylose contents of the flour were 86.69% and 29.92% indicating its suitability for energy source. As expected, the cyanide content is very low of about 1.688 ppm suggesting that it is safe for consumption. Refer to those properties, Gembili flour can be a promising raw material for the preparation of bakery, cookies, noodle and confectioneries.Keywords: proximate composition, flour, white yam, food, preparation

Outdoor Closed System of Algal Mass Culture : In Sight of Comparison on Vertical and Horizontal Photobioreactor for Cultivating the Spirulina sp. Hilda Farida; Puspita Sari Harahap; Rifana Sobari; Rudyanto Gunawan; Delicia Yunita Rahman; Dwi Susilaningsih
Reaktor Volume 19 No. 2 June 2019
Publisher : Dept. of Chemical Engineering, Diponegoro University

Spirulina are multiceluller and filamentous blue-green algae that has gained considerable popularity in the health food industry and increasingly as a protein and vitamin supplement to aquaculture diets. The challenge for economically and fulfill the requirement for food and medical purposes has create many ways for mass-growth production, that possibly cultivated in the open-system (such as a raceway pond) or closed-system photobioreactors (such as tubular, bubble-column, airlift, flat-panel, and vertical). the cultivation of teh Spirulina on the vertical and horizontal photobioreactor has been studied. The photobioreactor, namely BJVP and BJHP, has a design to be less energy consumption using the air bubbling or circular paddle. The observation was conducted in a whole year with parameters of rainfall, temperature, light intensity, pH, and salinity. Result showed that cultivation of Spirulina on the vertical photobioreactor growth faster than teh horizontal photobioreactor systems and the yield of biomass was about 0.94 gDW/L. Average of temperature ranges of BJHP were 31.0C-35.5C, salinities were 35 per mil level, pH were 8.55-10.86, and light intensity were 427-2001 umol photon s-1m-2. Whereas the BJVP has averages temperature range of 31.4C-33.9C, salinity 33-35 per mil level, pH 8.46-10.75, and light intensity 532-2062 umol photon s-1m-2. The proximate analyses of biomass from BJVP cultivation shows has tendency higher protein content compared to BJHP. The optimization of both reactors has continuing evaluated in order to get the optimum parameters required for economically Spirulina cultivation systems.Keywords: Spirulina, BJVP, BJHP, outdoor mass cultivating system, photobioreactor.

Activated Carbon Derived From OPEFB by One Step Steam Activation and Its Application for Dye Adsorption : Kinetics and Isothermal Studies Fahriya Puspita Sari; Dede Heri Yuli Yanto; Gustan Pari
Reaktor Volume 19 No. 2 June 2019
Publisher : Dept. of Chemical Engineering, Diponegoro University

Activated carbon was prepared from OPEFB by one step steam activation method. The adsorption performance for the removal of acid orange 52 (AO 52), reactive blue 19 (RB 19), basic violet 1 (BV 1) was investigated. Each dye has a different chemical structure such as azoic, anthraquinone, triarylmethane for AO 52, RB 19, and BV 1 respectively. The effects of adsorbent dosage, pH, and contact time on the adsorption process were studied. Experimental data were analyzed by model equations such as Langmuir, Freundlich and Temkin isotherms and it was found that the Langmuir isotherm model best fitted for all three dyes with R2 values is higher than 0.95. Langmuir model assumes a homogeneous nature and monolayer coverage of dye molecules at the outer surface of activated carbon. Adsorption kinetics was determined using pseudo-first-order, pseudo-second-order rate equations, Elovich model and also intraparticle diffusion models. Kinetic studies showed that the pseudo-second-order kinetic model better described the adsorption process with R2 values exceeds 0,99 compared with the other kinetics model. The SEM images showed AC pores was well developed with steam activation while wider porosity is created in the macropore range. FT-IR analysis had shown that the AC functional groups were disappeared because of vaporization the volatile materials when the heating process. Keywords: Activated Carbon, Adsorption Isotherms, Kinetic, OPEFB, Steam Activation

Page 1 of 1 | Total Record : 7

Filter by Year

2019 2019

Filter By Issues

All Issue Volume 25 No.2 August 2025 Volume 25 No.1 April 2025 Volume 24 No.3 December 2024 Volume 24 No.2 August 2024 Volume 24 No.1 April 2024 Volume 23 No.3 December 2023 Volume 23 No.2 August 2023 Volume 23 No.1 April 2023 Volume 22 No. 3 December 2022 Volume 22 No.2 August 2022 Volume 22 No. 1 April 2022 Volume 21 No.4 December 2021 Volume 21 No. 3 September 2021 Volume 21 No. 2 June 2021 Volume 21 No. 1 March 2021 Volume 20 No.4 December 2020 Volume 20 No.3 September 2020 Volume 20 No.2 June 2020 Volume 20 No.1 March 2020 Volume 19 No. 4 December 2019 Volume 19 No. 3 September 2019 Volume 19 No. 2 June 2019 Volume 19 No. 1 March 2019 Volume 18 No. 4 December 2018 Volume 18 No. 3 September 2018 Volume 18 No. 2 June 2018 Volume 18 No. 1 March 2018 Volume 17 No. 4 Desember 2017 Volume 17 No. 3 September 2017 Volume 17 No. 2 Juni 2017 Volume 17 No.1 Maret 2017 Volume 16 No.4 Desember 2016 Volume 16 No.3 September 2016 Volume 16 No. 2 Juni 2016 Volume 16 No.1 Maret 2016 Volume 15 No.4 Oktober 2015 Volume 15 No.3 April 2015 Volume 15, No.2, OKTOBER 2014 Volume 15, No.1, APRIL 2014 Volume 14, No. 4, OKTOBER 2013 Volume 14, No. 3, APRIL 2013 Volume 14, Nomor 2, Oktober 2012 Volume 14, Nomor 1, April 2012 Volume 13, Nomor 4, Desember 2011 Volume 13, Nomor 3, Juni 2011 Volume 13, Nomor 2, Desember 2010 Volume 13, Nomor 1, Juni 2010 Volume 12, Nomor 4, Desember 2009 Volume 12, Nomor 3, Juni 2009 Volume 12, Nomor 2, Desember 2008 Volume 12, Nomor 1, Juni 2008 Volume 11, Nomor 2, Desember 2007 Volume 11, Nomor 1, Juni 2007 Volume 10, Nomor 2, Desember 2006 Volume 10 No. 1 Juni 2006 Volume 09 No. 02 Desember 2005 Volume 09 No.1 Juni 2005 Volume 08 No.2 Desember 2004 Volume 08 No.1 Juni 2004 Volume 07 No.2 Desember 2003 Volume 07 No. 1 Juni 2003 Volume 6 No. 2 Desember 2002 Volume 6 No. 1 Juni 2002 Volume 5 No.2 Desember 2001 Volume 5 No. 1 Juni 2001 Volume 3 No.1 Desember 1999 More Issue

Home Page

OAI Link

Editorial Team

Contact

Reviewer

Google Scholar

Contact Name
Dessy Ariyanti

Contact Email
dessy.ariyanti@che.undip.ac.id

Phone
+62247460058

Journal Mail Official
j.reaktor@che.undip.ac.id

Editorial Address
Department of Chemical Engineering, Diponegoro University Jl. Prof. Soedarto SH Tembalang Semarang 50275

Location
Kota semarang,

Jawa tengah

INDONESIA

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Home Page

OAI Link

Editorial Team

Contact

Reviewer

Google Scholar

Contact Name Dessy Ariyanti

Contact Email dessy.ariyanti@che.undip.ac.id

Phone +62247460058

Journal Mail Official j.reaktor@che.undip.ac.id

Editorial Address Department of Chemical Engineering, Diponegoro University Jl. Prof. Soedarto SH Tembalang Semarang 50275

Location Kota semarang, Jawa tengah INDONESIA

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Contact Name
Dessy Ariyanti

Contact Email
dessy.ariyanti@che.undip.ac.id

Phone
+62247460058

Journal Mail Official
j.reaktor@che.undip.ac.id

Editorial Address
Department of Chemical Engineering, Diponegoro University Jl. Prof. Soedarto SH Tembalang Semarang 50275

Location
Kota semarang,

Jawa tengah

INDONESIA