cover
Contact Name
Tole Sutikno
Contact Email
ijece@iaesjournal.com
Phone
-
Journal Mail Official
ijece@iaesjournal.com
Editorial Address
-
Location
Kota yogyakarta,
Daerah istimewa yogyakarta
INDONESIA
International Journal of Electrical and Computer Engineering
ISSN : 20888708     EISSN : 27222578     DOI : -
International Journal of Electrical and Computer Engineering (IJECE, ISSN: 2088-8708, a SCOPUS indexed Journal, SNIP: 1.001; SJR: 0.296; CiteScore: 0.99; SJR & CiteScore Q2 on both of the Electrical & Electronics Engineering, and Computer Science) is the official publication of the Institute of Advanced Engineering and Science (IAES). The journal is open to submission from scholars and experts in the wide areas of electrical, electronics, instrumentation, control, telecommunication and computer engineering from the global world.
Articles 51 Documents
Search results for , issue "Vol 6, No 2: April 2016" : 51 Documents clear
A Preliminary Performance Evaluation of K-means, KNN and EM Unsupervised Machine Learning Methods for Network Flow Classification Alhamza Alalousi; Rozmie Razif; Mosleh AbuAlhaj; Mohammed Anbar; Shahrul Nizam
International Journal of Electrical and Computer Engineering (IJECE) Vol 6, No 2: April 2016
Publisher : Institute of Advanced Engineering and Science

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (186.691 KB) | DOI: 10.11591/ijece.v6i2.pp778-784

Abstract

Unsupervised leaning is a popular method for classify unlabeled dataset i.e. without prior knowledge about data class. Many of unsupervised learning are used to inspect and classify network flow. This paper presents in-deep study for three unsupervised classifiers, namely: K-means, K-nearest neighbor and Expectation maximization. The methodologies and how it’s employed to classify network flow are elaborated in details. The three classifiers are evaluated using three significant metrics, which are classification accuracy, classification speed and memory consuming. The K-nearest neighbor introduce better results for accuracy and memory; while K-means announce lowest processing time.
Visual and Surface Properties of CdTe Thin Films on CdS/FTO Glass Substrates Ramya K; Yuvaraja T
International Journal of Electrical and Computer Engineering (IJECE) Vol 6, No 2: April 2016
Publisher : Institute of Advanced Engineering and Science

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (629.867 KB) | DOI: 10.11591/ijece.v6i2.pp468-473

Abstract

Cadmium telluride (CdTe) thin film material was deposited ontop of Cadmium Sulfide (CdS) substrate using vacuum evaporation technique. The sample was characterized using X-ray diffraction(XRD) and UV-VIS-NIR spectroscopy. XRD studies revealed that the sample was polycrystalline in nature. The SEM image showed that the sample is columnar in structure and the grains are uniform. Optical band gap of the CdTe thin film was estimated from transmittance and reflectance data and it was found 1.53eV.The structural, optical and surface properties of the film showed that the CdTe thin film materials can be used for fabrication of CdTe thin film solar cell.
Modified Predictive Control for a Class of Electro-Hydraulic Actuator Abdulrahman A.A. Emhemed; Rosbi Bin Mamat; Ahmad ‘Athif Mohd Faudzi; Mohd Ridzuan Johary; Khairuddin Osman
International Journal of Electrical and Computer Engineering (IJECE) Vol 6, No 2: April 2016
Publisher : Institute of Advanced Engineering and Science

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (595.419 KB) | DOI: 10.11591/ijece.v6i2.pp630-638

Abstract

Many model predictive control (MPC) algorithms have been proposed in the literature depending on the conditionality of the system matrix and the tuning control parameters. A modified predictive control method is proposed in this paper. The modified predictive method is based on the control matrix formulation combined with optimized move suppression coefficient. Poor dynamics and high nonlinearities are parts of the difficulties in the control of the Electro-Hydraulic Actuator (EHA) functions, which make the proposed matrix an attractive solution. The developed controller is designed based on simulation model of a position control EHA to reduce the overshoot of the system and to achieve better and smoother tracking. The performance of the designed controller achieved quick response and accurate behavior of the tracking compared to the previous study.
Sufficient Authentication for Energy Consumption in Wireless Sensor Networks Hema Gopinath Sukavasi; Lokesh Kanagala; Riaz Shaik
International Journal of Electrical and Computer Engineering (IJECE) Vol 6, No 2: April 2016
Publisher : Institute of Advanced Engineering and Science

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (343.451 KB) | DOI: 10.11591/ijece.v6i2.pp735-742

Abstract

Given the understanding of the prospective WSN programs and because of source restrictions, key management emerges as a complicated problem for WSNs. One of the main issues when developing a key management scheme is the system scalability. Indeed, the method should assistance a huge number of nodes to allow a large range implementation of the system. In this paper we implemented a performance trade-off research of power intake vs. Quality of Solutions obtain in stability, suitability, and security for redundancy control of clustered heterogeneous wireless indicator systems using multipath routing to response customer concerns. We urbanized a novel probability style to evaluate the best redundancy stage in terms of direction redundancy (mp ) and resource redundancy (ms), as well as the best attack identification configurations with regards to the number of voters (m) and the attack incantation interval under which the life-time of a heterogeneous wireless sensor network is optimized while fulfilling the stability, timeliness and protection specifications of question processing applications in the existence of untrustworthy wireless communication and harmful nodes. Lastly, we used our analysis outcomes to the style of powerful redundancy management criteria to recognize and implement the best design parameter configurations at playback in reaction to environment changes to extend the program life-time
New Classifier Design for Static Security Evaluation Using Artificial In-telligence Techniques Ibrahim Saeh; Wazir Mustafa; Nasir Al-geelani
International Journal of Electrical and Computer Engineering (IJECE) Vol 6, No 2: April 2016
Publisher : Institute of Advanced Engineering and Science

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (15.022 KB) | DOI: 10.11591/ijece.v6i2.pp870-876

Abstract

This paper proposes evaluation and classification classifier for static security evaluation (SSE) and classifica-tion. Data are generated on (30, 57, 118 and 300) bus IEEE test systems used to design the classifiers. The implementation decision tree methods on several IEEE test systems involved appropriateness SSE and classi-fication by using four algorithms of DT’s. Empirically, with the present of FSA, the implementation results indicate that these classifiers have the capability for system security evaluation and classification. Lastly, FSA is efficient and effective approach for real-time evaluation and classification classifier design.
Comparative Assessment on Linearity Test based V2π and Vπ/2 Voltage Variations of Closed Loop IFOG T. Sireesha; K. Krishna Murthy
International Journal of Electrical and Computer Engineering (IJECE) Vol 6, No 2: April 2016
Publisher : Institute of Advanced Engineering and Science

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (2792.298 KB) | DOI: 10.11591/ijece.v6i2.pp583-595

Abstract

Interferometric Fiber Optic Gyroscope (IFOG) has to operate in closed loop condition to achieve inertial grade performance. The closed loop system is mainly depends upon the amplitude of the ramp signal (V2π of IOC) and bias (square wave) signal frequency (fbias). The digital phase ramp function is given as feedback to the optical system and makes gyro to null condition. The peak-to-peak amplitude (Vπ/2) of biasing signal is one-fourth of the ramp amplitude (V2π). If there are any variations in the amplitude of the ramp and biasing signals, then it introduces variations in the gyro performance. In this paper, a comparative discussion made in the gyro parameters for three cases: (i) V2π (vary) & Vπ/2 (constant), (ii) Vπ/2 (vary) & V2π (constant) and (iii) both V2π and Vπ/2 are varying simultaneously. The effects on gyroscope are described with the derived values in terms of linearity. From the experimental results, it was observed that the gyro output is very sensitive with respect to V2π variations and obtained the percentage error of 10% in gyro output, but very less effect due to Vπ/2 variations. So, the proper resetting of ramp voltage (V2π) is required to avoid nonlinearities and instabilities in gyro output.
Identification of Acoustic Signals of Internal Electric Discharges on Glass Insulator under Variable Applied Voltage Nasir A. Al-geelani; M. Afendi M. Piah; Ibrahim Saeh; Nordiana Azlin Othman; Fatin Liyana Muhamedin; N. F. Kasri
International Journal of Electrical and Computer Engineering (IJECE) Vol 6, No 2: April 2016
Publisher : Institute of Advanced Engineering and Science

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (696.931 KB) | DOI: 10.11591/ijece.v6i2.pp827-834

Abstract

A Partial Discharge (PD) is an unwanted phenomenon in electrical equipment. Therefore it is of great importance to identify different types of PD and assess their severity. This paper investigates the acoustic emissions associated with Internal Discharge (ID) from different types of sources in the time-domain. An experimental setup was arranged in the high voltage laboratory, a chamber with an electrode configuration attached to it was connected to a high voltage transformer for generating various types of PD. A laboratory experiment was done by making the models of these discharges. The test equipment including antennas as a means of detection and digital processing techniques for signal analysis were used. Wavelet signal processing was used to recover the internal discharge acoustic signal by eliminating the noises of many natures.
Cooling on Photovoltaic Panel Using Forced Air Convection Induced by DC Fan A.R. Amelia; Y.M. Irwan; M. Irwanto; W.Z. Leow; N. Gomesh; I. Safwati; M.A.M. Anuar
International Journal of Electrical and Computer Engineering (IJECE) Vol 6, No 2: April 2016
Publisher : Institute of Advanced Engineering and Science

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (1523.196 KB) | DOI: 10.11591/ijece.v6i2.pp526-534

Abstract

Photovoltaic (PV) panel is the heart of solar system generally has a low energy conversion efficiency available in the market. PV panel temperature control is the main key to keeping the PV panel operate efficiently. This paper presented the great influenced of the cooling system in reduced PV panel temperature. A cooling system has been developed based on forced convection induced by DC fan as cooling mechanism. DC fan was attached at the back side of PV panel will extract the heat energy distributed and cool down the PV panel. The working operation of DC fan controlled by PIC18F4550 microcontroller which depending on the average value of PV panel temperature. Experiments were performed with and without cooling mechanism attached at the backside PV panel. The whole PV system was subsequently evaluated in outdoor weather conditions. As a result, it is concluded that there is an optimum number of DC fans required as cooling mechanism in producing efficient electrical output from a PV panel. The study clearly shows how cooling mechanism improves the performance of PV panel at the hot climatic weather. In short, the reduction of PV panel temperature is very important to keep its performance operated efficiently.
An Improved ICI Self Cancellation Scheme for OFDM Systems Under Various Channels A. H. Sharief; M. Satya Sai Ram
International Journal of Electrical and Computer Engineering (IJECE) Vol 6, No 2: April 2016
Publisher : Institute of Advanced Engineering and Science

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (1635.551 KB) | DOI: 10.11591/ijece.v6i2.pp690-699

Abstract

Inter Carrier Interference (ICI) is being introduced in OFDM due to the carrier frequency offset (CFO), which will degrade the system performance and efficiency at higher modulation levels and it decreases the performance of power amplifiers. Hence, here in this paper, we introduced a novel ICI reduction algorithms cancellation under the various channel environments such as AWGN, Rayleigh and also Rician. Simulation results have been compared with existing and proposed schemes under these channel specifications and concluded that the Rayleigh has performed far better than the AWGN and Rician channel distributions in terms of Bit Error Rate (BER) and Carrier interference Ration (CIR) performance.
Designing and Simulation of Surrounding Supporting Multicast Routing Protocol Shaik Mahaboob Jani; Syed Umar; P.V.R.D Prasada Rao; Sridevi Gutta
International Journal of Electrical and Computer Engineering (IJECE) Vol 6, No 2: April 2016
Publisher : Institute of Advanced Engineering and Science

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (148.024 KB) | DOI: 10.11591/ijece.v6i2.pp785-791

Abstract

In the Wireless sensor networks having of multi-hop transmission in the Adhoc networks. These Adhoc networks having advantages of limited bandwidth and mobility which is more useful for the changing of and usage of various protocols, so that these Adhoc networks having energy conservation, simple to construct, robustness. In this paper we are proposing a new protocol called Surrounding supporting multicast routing protocol [SSMRP]. This protocol uses the mesh networks to enhance the resilience against change of node. This SSMRP utilizes the node locality which reduces the overhead of the route maintenance and it also reduces the route for good data transmissions. In this paper we clearly explain how the data will be delivered   efficiently by reducing the overheads.

Filter by Year

2016 2016


Filter By Issues
All Issue Vol 15, No 6: December 2025 Vol 15, No 5: October 2025 Vol 15, No 4: August 2025 Vol 15, No 3: June 2025 Vol 15, No 2: April 2025 Vol 15, No 1: February 2025 Vol 14, No 6: December 2024 Vol 14, No 5: October 2024 Vol 14, No 4: August 2024 Vol 14, No 3: June 2024 Vol 14, No 2: April 2024 Vol 14, No 1: February 2024 Vol 13, No 6: December 2023 Vol 13, No 5: October 2023 Vol 13, No 4: August 2023 Vol 13, No 3: June 2023 Vol 13, No 2: April 2023 Vol 13, No 1: February 2023 Vol 12, No 6: December 2022 Vol 12, No 5: October 2022 Vol 12, No 4: August 2022 Vol 12, No 3: June 2022 Vol 12, No 2: April 2022 Vol 12, No 1: February 2022 Vol 11, No 6: December 2021 Vol 11, No 5: October 2021 Vol 11, No 4: August 2021 Vol 11, No 3: June 2021 Vol 11, No 2: April 2021 Vol 11, No 1: February 2021 Vol 10, No 6: December 2020 Vol 10, No 5: October 2020 Vol 10, No 4: August 2020 Vol 10, No 3: June 2020 Vol 10, No 2: April 2020 Vol 10, No 1: February 2020 Vol 9, No 6: December 2019 Vol 9, No 5: October 2019 Vol 9, No 4: August 2019 Vol 9, No 3: June 2019 Vol 9, No 2: April 2019 Vol 9, No 1: February 2019 Vol 8, No 6: December 2018 Vol 8, No 5: October 2018 Vol 8, No 4: August 2018 Vol 8, No 3: June 2018 Vol 8, No 2: April 2018 Vol 8, No 1: February 2018 Vol 7, No 6: December 2017 Vol 7, No 5: October 2017 Vol 7, No 4: August 2017 Vol 7, No 3: June 2017 Vol 7, No 2: April 2017 Vol 7, No 1: February 2017 Vol 6, No 6: December 2016 Vol 6, No 5: October 2016 Vol 6, No 4: August 2016 Vol 6, No 3: June 2016 Vol 6, No 2: April 2016 Vol 6, No 1: February 2016 Vol 5, No 6: December 2015 Vol 5, No 5: October 2015 Vol 5, No 4: August 2015 Vol 5, No 3: June 2015 Vol 5, No 2: April 2015 Vol 5, No 1: February 2015 Vol 4, No 6: December 2014 Vol 4, No 5: October 2014 Vol 4, No 4: August 2014 Vol 4, No 3: June 2014 Vol 4, No 2: April 2014 Vol 4, No 1: February 2014 Vol 3, No 6: December 2013 Vol 3, No 5: October 2013 Vol 3, No 4: August 2013 Vol 3, No 3: June 2013 Vol 3, No 2: April 2013 Vol 3, No 1: February 2013 Vol 2, No 6: December 2012 Vol 2, No 5: October 2012 Vol 2, No 4: August 2012 Vol 2, No 3: June 2012 Vol 2, No 2: April 2012 Vol 2, No 1: February 2012 Vol 1, No 2: December 2011 Vol 1, No 1: September 2011 More Issue