cover
Contact Name
Alfian Maarif
Contact Email
alfianmaarif@ee.uad.ac.id
Phone
-
Journal Mail Official
biste@ee.uad.ac.id
Editorial Address
-
Location
Kota yogyakarta,
Daerah istimewa yogyakarta
INDONESIA
Buletin Ilmiah Sarjana Teknik Elektro
ISSN : 26857936     EISSN : 26859572     DOI : 10.12928
Core Subject : Engineering,
Buletin Ilmiah Sarjana Teknik Elektro (BISTE) adalah jurnal terbuka dan merupakan jurnal nasional yang dikelola oleh Program Studi Teknik Elektro, Fakultas Teknologi Industri, Universitas Ahmad Dahlan. BISTE merupakan Jurnal yang diperuntukkan untuk mahasiswa sarjana Teknik Elektro. Ruang lingkup yang diterima adalah bidang teknik elektro dengan konsentrasi Otomasi Industri meliputi Internet of Things (IoT), PLC, Scada, DCS, Sistem Kendali, Robotika, Kecerdasan Buatan, Pengolahan Sinyal, Pengolahan Citra, Mikrokontroller, Sistem Embedded, Sistem Tenaga Listrik, dan Power Elektronik. Jurnal ini bertujuan untuk menerbitkan penelitian mahasiswa dan berkontribusi dalam pengembangan ilmu pengetahuan dan teknologi.
Arjuna Subject : -
Articles 10 Documents
Search results for , issue "Vol. 5 No. 3 (2023): September" : 10 Documents clear
Vulnerability Analysis and Prevention on Software as a Service (SaaS) of Archive Websites Mushlihudin Mushlihudin; Danis Faisal
Buletin Ilmiah Sarjana Teknik Elektro Vol. 5 No. 3 (2023): September
Publisher : Universitas Ahmad Dahlan

Show Abstract | Download Original | Original Source | Check in Google Scholar

Abstract

Web Archive is a SaaS service that has an important role in providing better document storage and management. Good document management has a positive impact on optimizing business operations, increasing collaboration, reducing costs, and protecting sensitive information. Cybercrime, which has an increasingly high intensity, is a serious threat to the security of data stored in web archives. This research aims to improve data security on web archives by conducting ongoing testing. Testing was carried out on a server with a Linux operating system and web archives managed by a file manager system. This study tests the attack using the OWASP application method, and an XSS attack on a web archive with a Linux server and using a file management application. The testing phase includes Information Gathering, Vulnerability Assessment, Exploiting, and Reporting. Based on the results of the research, it was obtained that the first vulnerability test contained 9 vulnerabilities in 9 categories. The second vulnerability test obtained 7 vulnerabilities and the third test found no vulnerabilities. At the end of each test, recommendations for improvements to the web archive are made to the web archive manager and a re-testing process for vulnerabilities is carried out. This process is carried out repeatedly with continuous improvement. Testing the attack and repair of the web archive was carried out repeatedly and managed to get a vulnerability level of Level 0.1-3.9 points with Low status.
Detection of Fuel Purity Using the TCS3200 Sensor Using the Euclidean Distance Function Muhamad Daffa Al Fitra; Abdul Fadlil
Buletin Ilmiah Sarjana Teknik Elektro Vol. 5 No. 3 (2023): September
Publisher : Universitas Ahmad Dahlan

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.12928/biste.v5i3.8260

Abstract

Petroleum is oil produced by nature. It widely consumed by two-wheeled and four-wheeled vehicles. This research was conducted in order to know the RGB value of each fuel oil. This study aims to examine the purity of each fuel oil. Calculations in this study were carried out using the Euclidean Distance function aiming to find accuracy from the similarity of the average value and standard deviation of each fuel oil. In this study, detecting the purity of fuel oil using the TCS3200 sensor using the Arduino Uno as microcontroller and for output using I2C LCD 16x2. Before detecting fuel oil, sensor calibration is carried out for each fuel oil. After performing the calibration, 30 data collected. Data processing was carried out after the data was obtained, a search was carried out for the average and standard deviation of the RGB values for each fuel oil. After obtaining the values of the mean and standard deviation, we recalculate using the Euclidean Distance function because we get the similarity of the values of the mean and standard deviation. In the calculation of the accuracy of the Euclidean Distance function, it is found that the matching value of Pertamax is 25, Pertamax Turbo is 21, and Dexlite is 28. In this calculation, an accuracy of 82% is obtained.
Temperature Measurement and Light Intensity Monitoring in Mini Greenhouses for Microgreen Plants Using the Tsukamoto Fuzzy Logic Method Dea Suryaningsih; Riky Dwi Puriyanto
Buletin Ilmiah Sarjana Teknik Elektro Vol. 5 No. 3 (2023): September
Publisher : Universitas Ahmad Dahlan

Show Abstract | Download Original | Original Source | Check in Google Scholar

Abstract

Microgreens are tender young plants that can be harvested as seeds and are a type of vegetable that can be harvested in about 7-14 days. Microgreen growth is influenced by several factors, including ambient temperature and light intensity. Microgreen plants require temperatures between 24°C – 30°C at all times during growth. These microgreen plants were grown on cocopeat growing media and given in a special room called a mini greenhouse with a size of 60 × 50 cm. The research method used is Tsukamoto's Fuzzy Logic. This research aims to make a tool to detect the temperature in a mini greenhouse. The research method used is Tsukamoto's Fuzzy Logic. Increasing temperature stability to keep the temperature in the mini greenhouse room at the ideal temperature. In this study, the sensors used were DHT 11 and grow light lamps. The results of this study indicate that the temperature and light intensity in this mini greenhouse are very stable and are at a temperature of 24°C-30°C with the accuracy of the sensor in this tool showing an error value of 5.39%.
Design and Development of a IoT-Based Moisture Detection Device for Corn Seeds Guguh Makbul Rahmadani Fitra; Sunardi Sunardi
Buletin Ilmiah Sarjana Teknik Elektro Vol. 5 No. 3 (2023): September
Publisher : Universitas Ahmad Dahlan

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.12928/biste.v5i3.8345

Abstract

Lately the planting of corn has increased and increased in several areas. The increasing popularity of corn is due to its high economic value. Corn that has been harvested cannot be sold immediately because it must meet certain moisture content requirements. Farmers must know the maximum value of the moisture content in the corn kernels resulting from the harvest to meet one of the standards set by the industry. The water content contained in corn kernels can have a big influence on determining its quality or selling value. This study aims to design and implement a device for detecting the moisture content of corn kernels as a tool to help farmers produce dry and good quality corn kernels. This research uses an Internet of Things (IoT) based method by sending the corn moisture content and ambient air temperature values to a mobile phone via the Blynk application. The components used are the NodeMCU ESP2866 microcontroller, YL-69 sensor, DHT-22 sensor, 16x2 I2C LCD, and battery. The results of this study have been able to make a water content detector tool on corn kernels based on IoT that can work well. From several tests carried out at night and in the morning, a low error rate of 2.3% was found on the DHT-22 sensor, while on the YL-69 sensor the tests were carried out on three types of corn samples, namely dry, medium, and dry corn kernels. and wet obtained a low error rate of 3.1%.
Design of Micro Hydro Power Plant System Prototype with Arduino Uno-Based Dummy Load Geri Geraldo Salam; Ahmad Raditya Cahya Baswara
Buletin Ilmiah Sarjana Teknik Elektro Vol. 5 No. 3 (2023): September
Publisher : Universitas Ahmad Dahlan

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.12928/biste.v5i3.8360

Abstract

Electricity is a vital need and economic resource that is needed for all communities. One of the electricity technologies that can be generated from water is utilizing water discharge to be converted into electrical energy or called PLTMH (Microhydro Power Plant). This research has been done but still needs to be developed, for example on an automatic loading system. With the help of a 1 channel relay to control the dummy load automatically. This research uses 2 different test simulations and different wiring circuits. The results of this study show that in simulation 2 the dummy load system cannot run at all. Due to the voltage value read is not so stable by the ZMPT101B sensor. The spike of the read voltage value causes it to be difficult for the relay to analyze the voltage value then causes the logic on the relay to be disturbed and an error occurs in the automatic dummy load system. However, in simulation 1 the dummy load system can work properly. For comparison of voltage values between a multimeter with a voltage value of 4.5 V (before adding a load) and on the Arduino IDE with an average of 4.564 V, the average error is -1.42222. For comparison of frequency values between multimeter 47 Hz without load and on Arduino IDE with an average value of 47 Hz with an average error of -0.8, from ac generator rotation with a voltage value of 4.5V.
Temperature and Humidity Monitoring System in Internet of Things-based Solar Dryer Dome Dzakarasma Tazakka Ma’arij; Anton Yudhana
Buletin Ilmiah Sarjana Teknik Elektro Vol. 5 No. 3 (2023): September
Publisher : Universitas Ahmad Dahlan

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.12928/biste.v5i3.8633

Abstract

The village of Gerbosari has a program for cultivating spice rhizome plants as an effort to improve the economy. These plants are dried using a Solar Dryer Dome (SDD) as a solution to the rain-related issues. The SDD has an automatically controlled exhaust fan based on the measured temperature. Temperature and humidity readings are taken using DHT22 and DHT11 sensors, respectively. Weather conditions (clear or rainy) are detected using a rain sensor. Weather, temperature, and humidity monitoring are done through On The Spot (OTS) and Internet of Things (IoT) methods. OTS utilizes an LCD 16x2, while IoT utilizes the Blynk application and WhatsApp. The temperature errors for DHT22 and DHT11, respectively, are 1.572% and 0.721%, while the humidity errors are 5.223% for DHT22 and 3.214% for DHT11. If the error values approach 5% or more, program adjustments are necessary. Throughout the day, regardless of clear or rainy weather, the temperature inside the SDD is higher, and the humidity is lower than the temperature and humidity outside.
Development of Design and Control Manipulator Arm on Hexapod Robot with Smart Vision Sensor Gralo Yopa Rahmat Pratama; Nuryono Satya Widodo
Buletin Ilmiah Sarjana Teknik Elektro Vol. 5 No. 3 (2023): September
Publisher : Universitas Ahmad Dahlan

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.12928/biste.v5i3.8907

Abstract

In 2021, the Indonesian Search and Rescue Robot Competition underwent significant changes, transitioning from its original name of "Firefighting Robot Contest" to "Search and Rescue Robot Contest." With existing regulations and new races, this robot used in the Indonesian Search and Rescue Robot Contest is an essential addition manipulator robot arm to finish mission victim rescue. With existing study about Design Development and Control Manipulator Arm on this Hexapod Robot with Smart Vision Sensor expected can help the development of the AL-JAZARI team's hexapod robot in mission victim rescue. Research, This does development design and control from a manipulator robot arm that can save victims in the rules of the Indonesian Search and Rescue Robot Contest. This uses input from the Pixy Camera, and its output is from the movement of the manipulator arm of the MG90S servo, which can save the orange victim. A Pixy Camera detects the victim and is picked up by a robotic arm. The manipulator's arm uses the MG90S servo as the actuator. In contrast, the buffer from the servo uses a 3D print designed to adapt to robotic bodies and efficiently, at times, save victims. Result study This robot can run on the victim rescue track by pushing the start button, then the robot will move autonomously with level success casualty rescue by 85% at good lighting and level lighting success dim by 80%.
Design of a Liquid Tank Filling Control System Using PID Bagas Putra Anggara; Alfian Ma'arif; Nur Syuhadah Abu
Buletin Ilmiah Sarjana Teknik Elektro Vol. 5 No. 3 (2023): September
Publisher : Universitas Ahmad Dahlan

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.12928/biste.v5i3.8915

Abstract

This research investigates the precise regulation of liquid filling in tanks, specifically focusing on water storage systems. It employs the Proportional-Integral-Derivative (PID) control method in conjunction with an HC-SR04 ultrasonic sensor and an Arduino Uno microcontroller. Given the paramount importance of water as a resource, accurate management of its storage is of utmost significance. The PID control method, known for its rapid responsiveness, minimal overshoot, and robust stability, effectively facilitates this task. Integrating the ultrasonic sensor and microcontroller further augments the precision of water level regulation. The article expounds upon the foundational principles of the PID control method and elucidates its application in the context of liquid tank filling. It offers a comprehensive insight into the hardware configuration, encompassing pivotal components such as the Arduino Uno microcontroller, HC-SR04 ultrasonic sensor, and the L298 driver responsible for water pump control. The experimental approach is meticulous, presenting results from tests involving the Proportional Controller, Proportional Integral (PI) Controller, and Proportional Integral Derivative (PID) Controller. These tests rigorously analyze the impact of varying Proportional Gain (Kp), Integral Gain (Ki), and Derivative Gain (Kd) parameters on crucial performance metrics such as response time, overshoot, and steady-state error. The findings underscore the critical importance of an optimal parameter configuration, emphasizing the delicate equilibrium between response speed, precision, and error minimization. This research significantly advances PID control implementation in liquid tank filling, offering insights that pave the way for developing more efficient liquid management systems across various sectors. The identified optimal parameter configuration is Kp = 5.0, Ki = 0.3, and Kd = 0.2.
Optimization of Catfish Pond Water pH with PID Control using Outseal PLC Abdillah Ali Rachman; Muhamad Ariandi
Buletin Ilmiah Sarjana Teknik Elektro Vol. 5 No. 3 (2023): September
Publisher : Universitas Ahmad Dahlan

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.12928/biste.v5i3.8944

Abstract

The increasing need for national consumption fish every year makes the business of cultivating consumption fish such as catfish increasingly developed. In catfish farming, the pH level factor in water affects the growth and development of catfish. If the pH level is not appropriate, it causes catfish disease and catfish appetite decreases. So it is necessary to control the pH level of water automatically which makes it easy to maintain pH levels in fish ponds using PID control. The system is designed using Outseal which is an Arduino bootloader-based PLC (Progammable Logic Control) which is open source at an affordable price connected to the RDD-AFE-001 sensor to send readings of actual pH levels into the PID control process. The PID output is in the form of a pwm value to run the L2890N motor driver as a nutrient pump speed regulator based on the pH value. The results of analyzing the value of PID parameters using simulink software obtained the value of Kp = 30, Ki = 20 and Kd = 15. The Propotional role produces a better rise time so that the pH sensor reading response is faster, then the integral role eliminates overshoot which causes more accurate sensor readings and the derivative role eliminates steady state errors that affect the stability of the pH sensor reading. The test results successfully maintain the pH level in water with a value of 7.0 with water temperatures ranging from 26 ° C - 30 ° C. The existence of this system can increase the growth and stability of the pH sensor reading. With this system can improve the growth and development of catfish and away from contracting diseases and facilitate farmers in terms of maintaining the pH level of catfish water.
Efficiency Through Automation: A Single System for Multiple Railway Guard Posts Mochammad Hisam Zulwidad; Indah Sulistiyowati
Buletin Ilmiah Sarjana Teknik Elektro Vol. 5 No. 3 (2023): September
Publisher : Universitas Ahmad Dahlan

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.12928/biste.v5i3.9001

Abstract

One of the important factors in train travel is the guarding of railroad crossings. Unfortunately, the number of unguarded railway crossings is still quite large. This condition makes it prone to accidents, especially at crossings that are heavily traveled by vehicles. Most of the railway crossing guards in Indonesia use a manual system, where in this system one guard post can only guard one railway crossing, due to limited human resources from PT KAI, many railway crossing doors are not guarded. To reduce accidents and cover the lack of human resources from PT.KAI, an Efficiency tool through Automation was made: One System for Multiple Railway Crossing Guard Posts. This tool is equipped with several main components, namely PLC, HMI, Infrared Sensor, and servo motor. The crossing gate is fully controlled by PLC and HMI as a monitoring system for all components in real-time. By detecting the arrival of the train, the infrared sensor can work by utilizing the movement of the train passing the sensor, not only detecting the arrival of the train, the infrared sensor also works to give orders so that the Servo Motor as a crossing door can be immediately closed and opened on the miniature, the railroad crossing itself is also equipped with an infrared sensor that functions to detect the presence of vehicles in the middle of the railroad crossing controlled by PLC and HMI as a monitoring system. This tool has been tested and the device functions properly and can help reduce the accident rate at railroad crossings.

Page 1 of 1 | Total Record : 10