Garuda - Garba Rujukan Digital

All

Jurnal Teknik Industri

industri
Website

Published by Universitas Muhammadiyah Malang

ISSN : 19781431 EISSN : 25274112 DOI : -

Core Subject : Economy, Science, Engineering,

Decision Sciences, Operations Research & Management Economics, Econometrics & Finance Industrial & Manufacturing Engineering

Dr. Saiful Anwar Malang is a state hospital has done it is job and function, but in 3rd class of pavilion room, the number of patient decrease dramatically. It is concerned with quality of this hospital. To answer this problem, research was done using Quality Function Deployment (QFD). Quality Function Deployment is a tool which design some needs include customers represented as a voice of customer and including some competitions and also groups some activities that usually called affinity graphic ang getting a benchmarking for it is competition. From the result analysis can be showed that main attribute for patience is a accuracy. And from House Of Quality can be found that getting a periodic meeting to evaluate this hospital and also increase a service can be made 20 concept

Arjuna Subject : Bisnis, Menejemen, dan Akutansi (semua kategori) - Strategi dan Menejemen

Articles 9 Documents

Search results for , issue "Vol 15, No 2 (2014): Agustus" : 9 Documents clear

Peningkatan Kualitas Knalpot Pada Pt Fajar Indah Menggunakan Metode Six Sigma Dharmawan, Lauretius Danny; Ekawati, Yurida
Jurnal Teknik Industri Vol 15, No 2 (2014): Agustus
Publisher : Department Industrial Engineering, University of Muhammadiyah Malang

PT Fajar Indah is an automotive company which is one of their flagship products is muffler for Colt Diesel FE 120 PS. During 2012 and 2013, PT Fajar Indah was able to produced muffler up to 2400 unit with 6-7% defects rate. There are five type of defects that affects mufflerâ€™s quality which are lidâ€™s defects, ringâ€™s defects, defects of resonatorâ€™s size, defects of plateâ€™s cutting size, and defects of broken plate. To determine whether improvements are needed in mufflerâ€™s prodution process and how they will be conducted so six sigma will be used for analysis. Analysis was conducted using DMAIC process, where recommended action for quality improvement were determined with RCA and FMEA. Result from analysis shows that PT Fajar Indah had 12,879 DPMO value and 3.73 sigma which mean that improvement is needed in mufflerâ€™s production process. Some recommended actions that can be done are maintenance scheduling, making work instruction and supervise it, improving storage method for ringâ€™s model, provide place for plate scraps from cutting process, adding more workesr for products inspection, and looking for suppliers who are able to provide plate with standard quality.

PENGEMBANGAN MODEL LOGIKA EVALUASI PROGRAM PENGEMBANGAN SDM RESPONSIF GENDER BIDANG ESDM Rohmatulloh, R; Shalahuddin, Mohammad Imam
Jurnal Teknik Industri Vol 15, No 2 (2014): Agustus
Publisher : Department Industrial Engineering, University of Muhammadiyah Malang

Logic model is a tool for telling the program in order to facilitate the evaluation. In a simple way, this model consists of the interrelation among the input-activity-output-outcome elements. This research aims to analyse the development of logic model for evaluating the human resources develoment in energy and mineral resources sectors related to the gender mainstreaming issue. It is developed through left-toright approach or forward logic. The result of study is the initial model based on the model development iteratively to achieve such outcomes the closest to the real conditions in gender-responsive human resources development. Expected program outcomes with increasing women?s participation in the following human resource development activities such as training, technical assistance, and the communication forum are increasing competence and role of women in the management of energy and mineral resources sector. This model can be used to evaluation process and enhanced in accordance with the needs and inputs from the stakeholders.

PERENCANAAN KEBUTUHAN MATERIAL DENGAN METODE MATERIAL REQUIREMENT PLANNING Suhartini, S
Jurnal Teknik Industri Vol 15, No 2 (2014): Agustus
Publisher : Department Industrial Engineering, University of Muhammadiyah Malang

Production activities which are conducted by some companies still use a lot of material inventory that production activities can run smoothly, but this condition is not considered optimal because many sources in the plant, so the investment is only in use for material. Ordering a material is not supported by data appropriately in product demand, it will make inventory of raw materials can not be sure so that the material is sometimes a lot and sometimes run out. The use of labor and production facilities are not accordance with demand, finally the production activities are not effective and efficient. Resources owned by the company must to be known in detail, so that the company can use capabilities of existing resources optimally. Company to achieve product demand should know the productive capacity, so that the ability of the company?s production targets can be achieved optimally, by measuring standard time at work operations and determine performance rating for each operator. In determining the demand for the product the next period using the method of linear regression forecasting the number of types of product demand of 1278 kg. Material requirements planning (MRP) orders can be made on day 7 of each month in accordance with the number of each type of raw material.

Model Persediaan Pemasok-Pembeli Dengan Produk Cacat Dan Kecepatan Produksi Terkontrol. Sejati, Nelita Putri; Jauhari, Wakhid Ahmad; Rosyidi, Cucuk Nur
Jurnal Teknik Industri Vol 15, No 2 (2014): Agustus
Publisher : Department Industrial Engineering, University of Muhammadiyah Malang

In this paper, we consider a joint economic lot size (JELS) model consisting of single vendor single buyerwith single product. We intend to study the impact of defective items and controllable production rate onthe model. The demand in buyer side is assumed to be stochastic. The delivery of lot from vendor to buyer is conducted under equal size shipment and the lead time is assumed to be constant. The defective items founded by the inspector in buyer side are carried in buyerâ€™s storage until the next shipment and will be returned to the vendor. The goal of the proposed model is to determine optimal delivery frequency, review period and production rate by minimizing the joint total cost. A sensitivity analysis is performed to show the impact of the changes of the decision variables on modelâ€™s behavior. The result from the sensitivity analysis shows that the joint total cost is sensitive to the changes of defect rate, demand uncertainty and demand rate.Â

Evaluasi Risiko Proyek Implementasi Sistem Erp Di Usaha Kecil Dan Menengah Cahyadi, Indra
Jurnal Teknik Industri Vol 15, No 2 (2014): Agustus
Publisher : Department Industrial Engineering, University of Muhammadiyah Malang

Enterprise Resource planning (ERP) implementations in the context of small medium size enterprises (SMEs) in Indonesia is discussed in this paper. Because SMEs are vulnerable organisations with a shortage of resources, it is essential for SMEs to succesfully implement an ERP system and reduce the risks and costs of business process reengineering embedded in it. Based on the case studies this paper analyzes organizational risk factor in ERP project in two Indonesian SMEs. By using company-specific Risk Analysis Method and Characteristics Analysis Method, the recommendations of how to manage the risks in ERP projects have been given.

Estimasi Jarak Tempuh Order Picking Manual Dengan Metode Analitik di PT. GMS Chandra, Agung
Jurnal Teknik Industri Vol 15, No 2 (2014): Agustus
Publisher : Department Industrial Engineering, University of Muhammadiyah Malang

Travel distance has a significant role in warehousing productivity. One way to calculate travel distance is to use analytical method, in term of average travel distance. Routing strategy implemented, S-shape / traversal strategy and Return strategy, random storage method are used in this paper at PT.GMS. The components of average travel distance are used to calculate: traveling distance from the depot to the first pick aisle, traveling distance through subaisle with picks, correction of travel distance for turns within subaisle, traveling distance in the cross aisle while picking, traveling distance back to the depot if all picks in one block, and total average travel distance. The results show the total average travel distance using S-shape is 41.4095 meter and return strategy is 45.7165 meter.

Perancangan Website Sebagai Media Promosi Dan Penjualan Pada Home Industry Abon Dewi, Shanty Kusuma; Garside, Annisa Kesy
Jurnal Teknik Industri Vol 15, No 2 (2014): Agustus
Publisher : Department Industrial Engineering, University of Muhammadiyah Malang

Marketing activity which is performed by a home industry of abon namely Lestari Jaya Pangan currently is not completely well established. Selling activity is conventionally run through offering the product to stores, market and also through retailer. Its affects the sale to be limited only nearby region of Malang. Promotion strategy also limited by using brochure and participating either local or national fair which is organized by goverment. In order to tackle the issue, the website is needed to be designed to support marketing and selling activity of its product particularly abon. website is designed by using oneline selling system with content management system (CMS) opencart. Through the website, marketing activity is more effective and able to increase income.

Penggunaan Uselearn Sebagai Metode Evaluasi Usability untuk E-Learning Restuputri, Dian Palupi; Mufti, Wahyu Fitrianda
Jurnal Teknik Industri Vol 15, No 2 (2014): Agustus
Publisher : Department Industrial Engineering, University of Muhammadiyah Malang

This study aimed to evaluate E-learning using uselearn method. Uselearn is usability assessment method to assess E-learning from variable quality and usability. The questionnaire was given to 101 participants. The participants were given a questionnaire according with 12 dimensions of uselearn. Structural Equation Modelling (SEM) was used to validate the result of quantitative statistic. The results obtained after processing the data using SEM formed 10 new usability dimensions namely Consistency and Functionality (CF), Error Prevention (EP), Visibility (VIS), Flexibility (FLEX), Accessibility (AC), Memorability (MEMO), Completeness (COM ), Reducing redundancy (RR), Interactivity, Feedback and Help (IFH), and Assessment Strategy (AS). From the analysis obtained the lowest usability index values for the dimensions of Interactivity Feedback and Help (IFH), Reducing redundancy (RR), Completeness (COM) and Error Prevention (EP). Improvements that can be done is to improve the appearance of the icon and menu additions, as well as setting the E-learning website.

Penyeimbangan Lintasan Produksi Dengan Metode Heuristik (Studi Kasus PT. XYZ Makassar) Saiful, S; Hambali, Mulyadi; Rahman, Tri Muhadi
Jurnal Teknik Industri Vol 15, No 2 (2014): Agustus
Publisher : Department Industrial Engineering, University of Muhammadiyah Malang

Â PT XYZ is one of the company which refers to furniture industries sector. The problem which faced by this company is unbalance of the production line which is caused by the unequal of work responsibility distribution in each work station. This problem caused the performance of line balance doesnâ€™t work properly. To solve this problem we need to do the line balancing of production line. It can be done by line balancing methode that assigns a number of work which is related in one production line until each work station has efficient time which is not more than the cycle time of the work station. Line balancing methode that used is heuristic methode which is devided into ranked positional weight methode, large candidate rule methode, and region approach methode. From those three heuristic methode that used as solution of line balancing, there was improvement happenned with the same value in doors of production line. Line efficiency increased into 94,07% from 62,71% at the beginning condition. Balance delay increased into 5,92% from 37,28% at the beginning condition. The idle time descreased into 12,39 minutes from 116,87 minutes at the beginning condition. The smoothness index descreased into 7,44 from 64,67 at the beginning condition.

Page 1 of 1 | Total Record : 9

Filter by Year

2014 2014

Filter By Issues

All Issue Vol. 25 No. 2 (2024): August Vol. 25 No. 1 (2024): February Vol. 24 No. 2 (2023): August Vol. 24 No. 1 (2023): February Vol. 23 No. 2 (2022): August Vol. 23 No. 1 (2022): February Vol. 22 No. 2 (2021): August Vol. 22 No. 1 (2021): February Vol. 21 No. 2 (2020): August Vol. 21 No. 1 (2020): February Vol 21, No 1 (2020): February Vol. 20 No. 2 (2019): August Vol 20, No 2 (2019): August Vol 20, No 1 (2019): February Vol. 20 No. 1 (2019): February Vol. 19 No. 2 (2018): Agustus Vol 19, No 2 (2018): Agustus Vol 19, No 1 (2018): Februari Vol. 19 No. 1 (2018): Februari Vol. 18 No. 2 (2017): Agustus Vol 18, No 2 (2017): Agustus Vol. 18 No. 1 (2017): Februari Vol 18, No 1 (2017): Februari Vol 17, No 2 (2016): Agustus Vol. 17 No. 2 (2016): Agustus Vol. 17 No. 1 (2016): Februari Vol 17, No 1 (2016): Februari Vol. 16 No. 2 (2015): Agustus Vol 16, No 2 (2015): Agustus Vol. 16 No. 1 (2015): Februari Vol 16, No 1 (2015): Februari Vol 15, No 2 (2014): Agustus Vol. 15 No. 2 (2014): Agustus Vol. 15 No. 1 (2014): Februari Vol 15, No 1 (2014): Februari Vol 14, No 2 (2013): Agustus Vol. 14 No. 2 (2013): Agustus Vol 13, No 2 (2012): Agustus Vol. 13 No. 2 (2012): Agustus Vol 13, No 1 (2012): Februari Vol. 13 No. 1 (2012): Februari Vol 12, No 2 (2011): Agustus Vol. 12 No. 2 (2011): Agustus Vol. 12 No. 1 (2011): Februari Vol 12, No 1 (2011): Februari Vol 11, No 2 (2010): Agustus Vol. 11 No. 2 (2010): Agustus Vol 11, No 1 (2010): Februari Vol. 11 No. 1 (2010): Februari Vol. 10 No. 2 (2009): Agustus Vol 10, No 2 (2009): Agustus Vol 10, No 1 (2009): Februari Vol. 10 No. 1 (2009): Februari Vol. 9 No. 2 (2008): Agustus Vol 9, No 2 (2008): Agustus Vol 9, No 1 (2008): Februari Vol. 9 No. 1 (2008): Februari Vol. 8 No. 2 (2007): Agustus Vol 8, No 2 (2007): Agustus Vol. 8 No. 1 (2007): Februari Vol 8, No 1 (2007): Februari Vol 4, No 2 (2003) Vol. 4 No. 2 (2003) Vol 3, No 2 (2002) Vol. 3 No. 2 (2002) Vol 3, No 1 (2002) Vol. 3 No. 1 (2002) Vol 2, No 2 (2001) Vol. 2 No. 2 (2001) Vol 2, No 1 (2001) Vol. 2 No. 1 (2001) Vol 1, No 2 (2000) Vol. 1 No. 2 (2000) Vol. 1 No. 1 (2000) Vol 1, No 1 (2000) More Issue

Home Page

OAI Link

Editorial Team

Contact

Reviewer

Google Scholar

Contact Name
Sugeng Santoso

Contact Email
sugeng.santoso@mercubuana.ac.id

Phone
+6282132044774

Journal Mail Official
ti.jurnal@umm.ac.id

Editorial Address
Departement Industrial Engineering University of Muhammadiyah Malang Jl. Tlogomas No 246 Malang

Location
Kota malang,

Jawa timur

INDONESIA

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Home Page

OAI Link

Editorial Team

Contact

Reviewer

Google Scholar

Contact Name Sugeng Santoso

Contact Email sugeng.santoso@mercubuana.ac.id

Phone +6282132044774

Journal Mail Official ti.jurnal@umm.ac.id

Editorial Address Departement Industrial Engineering University of Muhammadiyah Malang Jl. Tlogomas No 246 Malang

Location Kota malang, Jawa timur INDONESIA

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Contact Name
Sugeng Santoso

Contact Email
sugeng.santoso@mercubuana.ac.id

Phone
+6282132044774

Journal Mail Official
ti.jurnal@umm.ac.id

Editorial Address
Departement Industrial Engineering University of Muhammadiyah Malang Jl. Tlogomas No 246 Malang

Location
Kota malang,

Jawa timur

INDONESIA