Garuda - Garba Rujukan Digital

Article Per Year (5 Year)

All

Bulletin of Electrical Engineering and Informatics

EEI
Website

Published by Universitas Ahmad Dahlan

ISSN : - EISSN : - DOI : -

Core Subject : Engineering,

Electrical & Electronics Engineering

Bulletin of Electrical Engineering and Informatics (Buletin Teknik Elektro dan Informatika) ISSN: 2089-3191, e-ISSN: 2302-9285 is open to submission from scholars and experts in the wide areas of electrical, electronics, instrumentation, control, telecommunication and computer engineering from the global world. The journal publishes original papers in the field of electrical, computer and informatics engineering.

Arjuna Subject : -

Articles 45 Documents

1 2 3 4 5

Search results for , issue "Vol 8, No 2: June 2019" : 45 Documents clear

Experimental study on transient response of fuel cell Ameerul A. J. Jeman; Naeem M. S. Hannoon; Nabil Hidayat; Mohamed M. H. Adam; Ismail Musirin; Vijayakumar V.
Bulletin of Electrical Engineering and Informatics Vol 8, No 2: June 2019
Publisher : Institute of Advanced Engineering and Science

This research work discusses a control strategy to enhance the transient response of the fuel cell and boost the real and reactive power flow from grid connected to fuel cell. The current output of the fuel cell depends on the availability of hydrogen in the fuel cell stack, a battery bank is implemented to supply the transient current and to prevent it from hydrogen saturation. The battery should only supply when there is a transient. During steady state the total power is produced by the fuel cell by regulating its hydrogen input. A prototype of the system will be created to study a control scheme which regulates the current from an input source and a battery which is connected to a dc motor. The control philosophy is based on d-q transformation and subsequently generating a reference signal that is tracked by an IGBT based inverter. The speed of the motor is controlled using pulse with modulation. The dynamic modeling of the standalone fuel cell that is connected to a dc motor is carried out using MATLAB/SIMULINK platform. The simulation results show that the control scheme works well, although the dynamic response of the system can be improved. The testing carried on the prototype proves that the concept works well, but a hydrogen control scheme should be developed to improve the efficiency of the control scheme.

Routing performance of structured overlay in Distributed Hash Tables (DHT) for P2P Rafiza Ruslan; Ayu Shaqirra Mohd Zailani; Nurul Hidayah Mohd Zukri; Nur Khairani Kamarudin; Shamsul Jamel Elias; R. Badlishah Ahmad
Bulletin of Electrical Engineering and Informatics Vol 8, No 2: June 2019
Publisher : Institute of Advanced Engineering and Science

This paper presents a routing performance analysis of structured P2P overlay network. Due to the rapid development and hectic life, sharing data wirelessly is essential. P2P allows participating peers move freely by joining and leaving the network at any convenience time. Therefore, it exists constraint when one measuring the network performance. Moreover, the design of structured overlay networks is fragmented and with various design. P2P networks need to have a reliable routing protocol. In order to analyse the routing performance, this work simulates three structured overlay protocols-Chord, Pastry and Kademlia using OMNeT++ with INET and OverSim module. The result shows that Pastry is the best among others with 100% routing efficiency. However, Kademlia leads with 12.76% and 18.78% better than Chord and Pastry in lookup hop count and lookup success latency respectively. Hence, Pastry and Kamelia architectures will have a better choice for implementing structured overlay P2P network.

A Game theoretic approach for competition over visibility in social networks Khadija Touya; Mohamed Baslam; Rachid El Ayachi; Mostafa Jourhmane
Bulletin of Electrical Engineering and Informatics Vol 8, No 2: June 2019
Publisher : Institute of Advanced Engineering and Science

Social Networks have known an important evolution in the last few years. These structures, made up of individuals who are tied by one or more specific types of interdependency, constitute the window for members to express their opinions and thoughts by sending posts to their own walls or others' timelines. Actually, when a content arrives, it's located on the top of the timeline pushing away older messages. This situation causes a permanent competition over visibility among subscribers who jump on opponents to promote conflict. Our study presents this competition as a non-cooperative game; each source has to choose frequencies which assure its visibility. We model it, exploring the theory of concave games, to reach a situation of equilibrium; a situation where no player has the ultimate ability to deviate from its current strategy. We formulate the named game, then we analyze it and prove that there is exactly one Nash equilibrium which is the convergence of all players' best responses. We finally provide some numerical results, taking into consideration a system of two sources with a specific frequency space, and analyze the effect of different parameters on sources' visibility on the walls of social networks.

Detection of Aedes aegypti larvae using single shot multibox detector with transfer learning Mohamad Aqil Mohd Fuad; Mohd Ruddin Ab Ghani; Rozaimi Ghazali; Tarmizi Ahmad Izzuddin; Mohamad Fani Sulaima; Zanariah Jano; Tole Sutikno
Bulletin of Electrical Engineering and Informatics Vol 8, No 2: June 2019
Publisher : Institute of Advanced Engineering and Science

The flavivirus epidemiology has reached an alarming rate which haunts the world population including Malaysia. In fact, World Health Organization has proposed and practised many methods of vector control through environmental management, chemical and biological orientations but still cannot fully overcome the problem. This paper proposed a detection of Aedes Aegypti larvae in water storage tank using Single Shot Multibox Detector with transfer learning. The objective of the study was to acquire the training and the performance metrics of the detection. The detection was done using SSD with Inception_V2 through transfer learning. The experimental results revealed that the probability detection scored more than 80% accuracies and there was no false alarm. These results demonstrate the effectiveness of the model approach.

Evaluation of patient electrocardiogram datasets using signal quality indexing Nazrul Anuar Nayan; Hafifah Ab Hamid
Bulletin of Electrical Engineering and Informatics Vol 8, No 2: June 2019
Publisher : Institute of Advanced Engineering and Science

Electrocardiogram (ECG) is widely used in the hospital emergency rooms for detecting vital signs, such as heart rate variability and respiratory rate. However, the quality of the ECGs is inconsistent. ECG signals lose information because of noise resulting from motion artifacts. To obtain an accurate information from ECG, signal quality indexing (SQI) is used where acceptable thresholds are set in order to select or eliminate the signals for the subsequent information extraction process. A good evaluation of SQI depends on the R-peak detection quality. Nevertheless, most R-peak detectors in the literature are prone to noise. This paper assessed and compared five peak detectors from different resources. The two best peak detectors were further tested using MIT-BIH arrhythmia database and then used for SQI evaluation. These peak detectors robustly detected the R-peak for signals that include noise. Finally, the overall SQI of three patient datasets, namely, Fantasia, CapnoBase, and MIMIC-II, was conducted by providing the interquartile range (IQR) and median SQI of the signals as the outputs. The evaluation results revealed that the R-peak detectors developed by Clifford and Behar showed accuracies of 98% and 97%, respectively. By introducing SQI and choosing only high-quality ECG signals, more accurate vital sign information will be achieved.

The effects of rain fade on millimetre wave channel in tropical climate Asma Ali Budalal; Islam Md Rafiqul; Mohamed Hadi Habaebi; Tharek Abd. Rahman
Bulletin of Electrical Engineering and Informatics Vol 8, No 2: June 2019
Publisher : Institute of Advanced Engineering and Science

The main objective of this paper to determine multipath and time-varying channel behaviour of short-terrestrial millimetre-wave point-to-point radio links. In an attempt to invigorate the impact of rain attenuation on mm-wave channel parameters such as the RMS delay spread, path loss received power strength and Rician distribution with a K factor. A brief analysis of rain fading was presented based on the simultaneous measurement of one-minute rain rate and its effects on a short experimental link of 38 GHz. Rain fade average is observed as high as 16 dB for 300 m path at about 125 mm/hr rain intensity. The statistical spatial channel mode (SSCM) simulation software was utilized for an operating frequency of 38 GHz. To generate of power delay profile (PDP). For both omnidirectional and directional antenna. The RMS delay spread and path loss has been estimated using the environmental parameters of Kuala Lumpur city which illustrates the theoretical performances of 5G in Malaysia. It is observed that RMS delay spread, path loss received power strength and K factor effected dramatically by rain fade. (SSCM) simulation software has to be modified to consider rain fade dynamic characteristics to achieve ultra-reliability requirements of outdoor applications in the tropical regions. This study is important for understanding signal propagation phenomena in short distance and enabling the utilization of the millimetre wave band for an urban micro-cellular environment for 5G communication system.

Classification of different types of metal from recyclable household waste for automatic waste separation system Siti Hajar Yusoff; Sazali Mahat; Nur Shahida Midi; Sarah Yasmin Mohamad; Syasya Azra Zaini
Bulletin of Electrical Engineering and Informatics Vol 8, No 2: June 2019
Publisher : Institute of Advanced Engineering and Science

Nowadays, solid waste has become a major problem in Malaysia. However, most people in Malaysia are not aware and take this problem for granted. The rising number of population and massive development in recent years indirectly generated an enormous value of household waste, making the household waste the main generator for solid waste in Malaysia. It stated that only 5 percent of an average 30,000 tons of waste have been recycled in Malaysia. The purpose of the paper is to design a system to separate the metal recyclable household waste automatically and record the data waste collected. There are total of four detectors used to separate the non-metal, steel, copper and aluminum metal waste. The average time used to complete metal separation process by using the proposed prototype is 14.5 seconds. This paper includes a mechanical part, programming part, an electronic design and also the data collected from this proposed system. The system will be programmed using Arduino Mega as a microcontroller to control all the electronic component in the system.

Improved voice quality with the combination of transport layer & audio codec for wireless devices Othman O. Khalifa; Raihan Jannati Binti Roslin; Sharif Shah Newaj Bhuiyan
Bulletin of Electrical Engineering and Informatics Vol 8, No 2: June 2019
Publisher : Institute of Advanced Engineering and Science

Improving voice quality over wireless communication becomes a demanding feature for social media apps like facebook, whatsapp and other communication channels. Voice-over-internet protocol (VoIP) helps us to make quick telephone calls over the internet. It includes various mechanism which are signaling, controlling and transport layer. Over wireless links, packet loss and high transmission delay damage voice quality. Here VoIP quality will be measured by three main elements which are signaling protocol, audio codec and transport layer. To improve the overall voice quality, we need to combine these three elements properly to get the best score. Otherwise perceptual speech quality will not be the right tool to measure the voice quality. Here we will use Mean Opinion Score (MOS) for calculated jitter values and end to end delay. At the end, best combination of audio codec and signaling protocol produced the quality speech.

Automatic household waste separation system based on resistance value and moisture content Nurul Nazihah Ahamad; Sarah Yasmin Mohamad; Nur Shahida Midi; Siti Hajar Yusoff; Faridah Abd Rahman
Bulletin of Electrical Engineering and Informatics Vol 8, No 2: June 2019
Publisher : Institute of Advanced Engineering and Science

In the new era of globalization, waste disposal has turned into an immense concern among the nation. Nowadays, almost every part of the world is confronting a huge issue of improper disposal, segregation and recycling solid waste. Due to rapid growth in economy, industrialization and urbanization, there is also a rapid increase of capacity and volume of solid waste. As a result, improper management of solid waste lead to disturbance to the environment and human health. In this paper, a fully automated waste separation system to discriminate residual and recyclable waste is proposed. The system is designed to focus on household waste, since household waste ranks the highest volume of waste among others. It is designed to separate household waste into recyclable and residual waste according to the materials’ state, which is dry and wet, by employing a moisture sensor to the waste separation system.

A novel bio-inspired routing algorithm based on ACO for WSNs Afsah Sharmin; F. Anwar; S. M. A. Motakabber
Bulletin of Electrical Engineering and Informatics Vol 8, No 2: June 2019
Publisher : Institute of Advanced Engineering and Science

The methods to achieve efficient routing in energy constrained wireless sensor networks (WSNs) is a fundamental issue in networking research. A novel approach of ant colony optimization (ACO) algorithm for discovering the optimum route for information transmission in the WSNs is proposed here for optimization and enhancement. The issue of path selection to reach the nodes and vital correspondence parameters, for example, the versatility of nodes, their constrained vitality, the node residual energy and route length are considered since the communications parameters and imperatives must be taken into account by the imperative systems that mediate in the correspondence procedure, and the focal points of the subterranean insect framework have been utilized furthermore. Utilizing the novel technique and considering both the node mobility and the existing energy of the nodes, an optimal route and best cost from the originating node to the target node can be detected. The proposed algorithm has been simulated and verified using MATLAB and the simulation results demonstrate that new ACO based algorithm achieved improved performance, about 30% improvement compared with the traditional ACO algorithm, and faster convergence to determine the best cost route, and recorded an improvement in the energy consumption of the nodes per transmission.

Page 3 of 5 | Total Record : 45

1 2 3 4 5

Filter by Year

2019 2019

Filter By Issues

All Issue Vol 14, No 6: December 2025 Vol 14, No 5: October 2025 Vol 14, No 4: August 2025 Vol 14, No 3: June 2025 Vol 14, No 2: April 2025 Vol 14, No 1: February 2025 Vol 13, No 6: December 2024 Vol 13, No 5: October 2024 Vol 13, No 4: August 2024 Vol 13, No 3: June 2024 Vol 13, No 2: April 2024 Vol 13, No 1: February 2024 Vol 12, No 6: December 2023 Vol 12, No 5: October 2023 Vol 12, No 4: August 2023 Vol 12, No 3: June 2023 Vol 12, No 2: April 2023 Vol 12, No 1: February 2023 Vol 11, No 6: December 2022 Vol 11, No 5: October 2022 Vol 11, No 4: August 2022 Vol 11, No 3: June 2022 Vol 11, No 2: April 2022 Vol 11, No 1: February 2022 Vol 10, No 6: December 2021 Vol 10, No 5: October 2021 Vol 10, No 4: August 2021 Vol 10, No 3: June 2021 Vol 10, No 2: April 2021 Vol 10, No 1: February 2021 Vol 9, No 6: December 2020 Vol 9, No 5: October 2020 Vol 9, No 4: August 2020 Vol 9, No 3: June 2020 Vol 9, No 2: April 2020 Vol 9, No 1: February 2020 Vol 8, No 4: December 2019 Vol 8, No 3: September 2019 Vol 8, No 2: June 2019 Vol 8, No 1: March 2019 Vol 7, No 4: December 2018 Vol 7, No 3: September 2018 Vol 7, No 2: June 2018 Vol 7, No 1: March 2018 Vol 6, No 4: December 2017 Vol 6, No 3: September 2017 Vol 6, No 2: June 2017 Vol 6, No 1: March 2017 Vol 5, No 4: December 2016 Vol 5, No 3: September 2016 Vol 5, No 2: June 2016 Vol 5, No 1: March 2016 Vol 4, No 4: December 2015 Vol 4, No 3: September 2015 Vol 4, No 2: June 2015 Vol 4, No 1: March 2015 Vol 3, No 4: December 2014 Vol 3, No 3: September 2014 Vol 3, No 2: June 2014 Vol 3, No 1: March 2014 Vol 2, No 4: December 2013 Vol 2, No 3: September 2013 Vol 2, No 2: June 2013 Vol 2, No 1: March 2013 Vol 1, No 4: December 2012 Vol 1, No 3: September 2012 Vol 1, No 2: June 2012 Vol 1, No 1: March 2012 List of Accepted Papers (with minor revisions) More Issue

Home Page

OAI Link

Editorial Team

Contact

Reviewer

Google Scholar

Contact Name
-

Contact Email
-

Phone
-

Journal Mail Official
-

Editorial Address
-

Location
Kota yogyakarta,

Daerah istimewa yogyakarta

INDONESIA

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Home Page

OAI Link

Editorial Team

Contact

Reviewer

Google Scholar

Contact Name -

Contact Email -

Phone -

Journal Mail Official -

Editorial Address -

Location Kota yogyakarta, Daerah istimewa yogyakarta INDONESIA

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Contact Name
-

Contact Email
-

Phone
-

Journal Mail Official
-

Editorial Address
-

Location
Kota yogyakarta,

Daerah istimewa yogyakarta

INDONESIA