Claim Missing Document
Check
Articles

Found 3 Documents
Search

Determination of the Composition of Fly Ash, Bottom Ash and Lime or Cement Mixtures as Road Base Material. Case Study: Road Preservation of Sp. Kereng - Bereng Bengkel – Pilang – Pulang Pisau, Central Kalimantan Mochammad Yusuf Hilman; Noor Endah Mochtar; Soendiarto Soendiarto
Journal of Infrastructure & Facility Asset Management Vol 6 (2024): Special Issue 1 : Journal of Infrastructure & Facility Asset Management
Publisher : Departemen Teknik Sipil, Institut Teknologi Sepuluh Nopember

Show Abstract | Download Original | Original Source | Check in Google Scholar

Abstract

Aggregate material for road subbase layers that meet specifications is hard to find in Kalimantan Island. One alternative material is a mixture of fly ash and bottom ash (FABA) with the addition of other substances such as lime or cement as binders. It is essential to determine the optimum percentage of the fly ash, bottom ash, and lime or cement mixture to meet the requirements as road subbase material. This study was conducted by creating compositions of FABA with variations 100:0; 75:25; 50:50; 25:75; and 0:100; they were tested to determine the optimum mixture of FABA as a road subbase. Afterwards, additional materials that were cement (3%, 5%, and 7%) or lime (2%, 4%, and 6%) were added to the optimum mixture of FABA; and then, they were tested to obtain the subbase material that meets the requirement of Bina Marga specification criteria. The results show that the optimum FABA material mixture is 50:50 which has the soaked CBR value of 17.03%. Additional 7% of cement or 6% of lime give the highest values of soaked CBR and UCS. For cement, the soaked CBR value is 75.68% and the UCS value is 21.448 kg/cm2; for lime, the soaked CBR value is 60.16% and the UCS value is 27.70 kg/cm2. Based on Bina Marga specifications, SKh 1.15.1, it is known that the FABA mixture 50:50 ratio and the additional of 7% cement or 4% lime can be uses as road base materials.
Determination of the Composition of Fly Ash, Bottom Ash and Lime or Cement Mixtures as Road Base Material. Case Study: Road Preservation of Sp. Kereng - Bereng Bengkel – Pilang – Pulang Pisau, Central Kalimantan Mochammad Yusuf Hilman; Noor Endah Mochtar; Soendiarto Soendiarto
Journal of Infrastructure & Facility Asset Management Vol 6 (2024): Special Issue 2 : Journal of Infrastructure & Facility Asset Management
Publisher : Departemen Teknik Sipil, Institut Teknologi Sepuluh Nopember

Show Abstract | Download Original | Original Source | Check in Google Scholar

Abstract

Aggregate material for road subbase layers that meet specifications is hard to find in Kalimantan Island. One alternative material is a mixture of fly ash and bottom ash (FABA) with the addition of other substances such as lime or cement as binders. It is essential to determine the optimum percentage of the fly ash, bottom ash, and lime or cement mixture to meet the requirements as road subbase material. This study was conducted by creating compositions of FABA with variations 100:0; 75:25; 50:50; 25:75; and 0:100; they were tested to determine the optimum mixture of FABA as a road subbase. Afterwards, additional materials that were cement (3%, 5%, and 7%) or lime (2%, 4%, and 6%) were added to the optimum mixture of FABA; and then, they were tested to obtain the subbase material that meets the requirement of Bina Marga specification criteria. The results show that the optimum FABA material mixture is 50:50 which has the soaked CBR value of 17.03%. Additional 7% of cement or 6% of lime give the highest values of soaked CBR and UCS. For cement, the soaked CBR value is 75.68% and the UCS value is 21.448 kg/cm2; for lime, the soaked CBR value is 60.16% and the UCS value is 27.70 kg/cm2. Based on Bina Marga specifications, SKh 1.15.1, it is known that the FABA mixture 50:50 ratio and the additional of 7% cement or 4% lime can be uses as road base materials.
Determination of Optimum Mixture Between FABA and Local Fill Soil for Road Embankment. Case study: Road Preservation of Sp. Kereng - Bereng Bengkel – Pilang – Pulang Pisau, Central Kalimantan Raden Hisyam Syauqi Al Ghifari; Noor Endah Mochtar; Soendiarto Soendiarto
Journal of Infrastructure & Facility Asset Management Vol 6 No 1 (2024): Journal of Infrastructure & Facility Asset Management
Publisher : Departemen Teknik Sipil, Institut Teknologi Sepuluh Nopember

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.12962/jifam.v6i1.4182

Abstract

The road connecting Simpang Kereng, Bereng Bengkel, Pilang, and Pulang Pisau is part of the road network between two big cities in Kalimantan Island, Palangkaraya and Banjarmasin. These two big cities have a lot of activities that generate very high traffic volumes. Therefore, BPJN Central Kalimantan plans to make road improvements by widening the road. For this work, it needs a lot of good fill soil material that is very difficult to find in the nearest site; consequently, the cost of this project becomes very expensive. This condition can be done by mixing the local fill (good quality) soil with fly ash and bottom ash (FABA) as waste of Pulang Pisau Power Plant (PLTU PP). Because of that it needs to determine the optimum mixture between FABA and the local fill soil. The local soil, fly ash, and bottom ash can be classified as A-3 or SP, A-2-5 or SM, and A-3 or SP, respectively. Three different percentages of local soil, bottom ash, and fly ash mixtures were prepared (50:50:0), (40:40:20), and (30:30:40). They were tested to see which mixture that met the criteria for road embankments according to the General Specifications of Bina Marga Revision 2, 2018. The test results show that by mixing the local soil with FABA, the soaked CBR value decreases with the increase of FABA. The soaked CBR values of the local soil and the mixing materials, 50:50:0 (without fly ash), 40:40:20, and 30:30:40 are 17,78%, 17.22%, 15,87%, and 14.46%, respectively. It means that all the mixing materials meet the criteria for road embankment materials. Therefore, selection of the optimum mixing materials is based on the lowest unit price for material installed in the field, that is 30:30:40 mixture (30% local soil, 30% bottom ash, and 40% fly ash).