Inten Firdhausi Wardhani
Biomedical Engineering Study Program, Department of Physics, Faculty of Science and Technology, Universitas Airlangga Campus C, Surabaya 60115

Published : 2 Documents Claim Missing Document
Claim Missing Document
Check
Articles

Found 2 Documents
Search

Performance-Target-Oriented PID Tuning Using Extreme Learning Machine for Peristaltic Pump in Automated Peritoneal Dialysis Roshied Mohammad; Riries Rulaningtyas; Amila Sofiah; Franky Chandra; Inten Firdhausi Wardhani
Indonesian Applied Physics Letters Vol. 7 No. 1 (2026): Indonesian Applied Physics Letters - June 2026
Publisher : Universitas Airlangga

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.20473/iapl.v7i1.94235

Abstract

Automated Peritoneal Dialysis (APD) requires accurate dialysate flow regulation to ensure stable fluid transfer during fill and drain phases. Flow instability may prolong transfer processes and potentially reduce effective dwell time. This study proposes a performance-target-oriented Proportional-Integral-Derivative (PID) tuning framework based on Extreme Learning Machine (ELM) for APD peristaltic pump flow-rate control. A multi-domain simulation model was developed by integrating a DC motor actuator model and a lumped-parameter fluid dynamic model of a roller-type peristaltic pump in MATLAB/Simulink. The ELM model was trained using simulation-generated data to map desired response-performance parameters, including rise time, settling time, percent overshoot, and Integral Time Absolute Error (ITAE), into PID gains. The proposed method was evaluated under five target-performance scenarios and compared with the conventional Ziegler–Nichols tuning method. The balanced-focus ELM configuration achieved the most suitable overall response, with rise time of 0.1382 s, settling time of 1.8860 s, percent overshoot of 17.6694%, ITAE of 78.1001, and steady-state error of 0.0162. Compared with Ziegler–Nichols, the proposed method reduced overshoot by 74.87%, settling time by 55.46%, ITAE by 83.04%, and steady-state error by 96.11%. These results indicate that ELM-based PID tuning can improve APD flow-control stability and tracking accuracy under ideal simulation conditions for APD
Effect of Hydroxyapatite Filler on Mechanical Properties of PE/HAp Composite as a Candidate for Bone Repair Fitriyatul Qulub; Inten Firdhausi Wardhani
Indonesian Applied Physics Letters Vol. 4 No. 2 (2023): Indonesian Applied Physics Letters - December 2023
Publisher : Universitas Airlangga

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.20473/iapl.v4i2.48649

Abstract

Polymer is one material that can be used as a fixation to repair fractured or broken bones. However, polymers are soft and ductile, so modifying them by adding hydroxyapatite as a filler is necessary. Polyethylene is a high density polymer with more potent material properties to be utilized as a matrix. The PE-HAp composites were synthesized by compacting and heating the composition percentage of Hap 25%, 35% and 45%. Based on the characterization results using XRD, FTIR, and hardness test instruments, it is concluded that the addition of HAp composition results in better composite mechanical properties. The material properties are improving, increasing the hardness value (shore A) by 63 shore A. The hardness value increases because the composite properties are more compact, and the PE matrix physically binds the HAp filler. This is reinforced by XRD and FTIR characterization results, with no new compounds formed and no new molecular vibrational patterns in the FTIR spectrum.