Cavin Ananda Teguh S
Program Studi Pendidikan Teknik Otomotif, Fakultas Teknik, Universitas Negeri Medan, Jalan William Iskandar Ps. V, Deli Serdang, Sumatera Utara 20221, Indonesia

Published : 2 Documents Claim Missing Document
Claim Missing Document
Check
Articles

Found 2 Documents
Search

Analisis Pemerataan Distribusi Panas pada Permukaan Material Plastik pada Alat Mesin Press Sealing Indra Koto; Aken Derisman; Josua Amindo Tua Manurung; Cavin Ananda Teguh S
Panthera : Jurnal Ilmiah Pendidikan Sains dan Terapan Vol. 6 No. 3 (2026): July (In Progress)
Publisher : Lembaga Pendidikan, Penelitian, dan Pengabdian Kamandanu

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.36312/panthera.v6i3.1388

Abstract

Uniform heat distribution across plastic materials is a critical aspect of manufacturing processes such as molding and thermoforming. Irregularities in temperature distribution can lead to product defects, including deformation, uneven shrinkage, and compromised surface quality. This study aims to analyze the factors influencing heat distribution uniformity on the surface of plastic materials using a sealing press machine. An experimental method was employed to analyze heat distribution on Polypropylene (PP) surfaces using the sealing press. The study relied entirely on primary data regarding heat application specifically temperatures of 110°C, 140°C, and 180°C; a pressure of 3 bar; and a press distance of 0.08 m. The results indicate that heat distribution within the polymer is significantly influenced by the material's thermal conductivity, pressure, duration, press distance, and the conductive heating mode. Variations in the polymer's thermophysical properties result in distinct temperature distribution responses depending on the heating method used.
Pengaruh Penyetelan Celah Katup Menggunakan Bahan Bakar Pertamax pada Motor Honda Beat Injeksi 2022 Josua Amindo Tua Manurung; Cavin Ananda Teguh S; Rahma Doni
Panthera : Jurnal Ilmiah Pendidikan Sains dan Terapan Vol. 6 No. 4 (2026): October (In Progress)
Publisher : Lembaga Pendidikan, Penelitian, dan Pengabdian Kamandanu

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.36312/panthera.v6i4.1502

Abstract

Valve clearance adjustment is an important aspect in motorcycle engine maintenance that affects engine performance, fuel consumption, and exhaust emissions. This study aims to analyze the effect of valve clearance variations on engine performance, specific fuel consumption, and exhaust emissions on the 2022 Honda Beat Injection using Pertamax fuel (RON 92). The study used an experimental method with three variations of valve clearance, namely standard (0.15 mm intake and 0.20 mm exhaust), reduced (0.10 mm intake and 0.15 mm exhaust), and enlarged (0.20 mm intake and 0.25 mm exhaust). The parameters measured include power, torque, Specific Fuel Consumption (SFC), CO, and HC emissions. Power and torque data were obtained using a chassis dynamometer, while fuel consumption and emissions were measured using a fuel consumption meter and a gas analyzer. The results showed that standard conditions produced the best performance with a maximum power of 6.8 kW at 7,500 rpm and a maximum torque of 9.2 Nm at 5,500 rpm, which is still in line with the performance characteristics of the 2022 Honda Beat. The lowest SFC value was obtained under standard conditions at 285 g/kWh. The lowest CO and HC emissions were also obtained under standard conditions, at 1.24% and 186 ppm, respectively. The analysis showed that deviations in valve clearance from manufacturer specifications cause decreased engine performance, increased fuel consumption, and increased exhaust emissions. Therefore, adjusting valve clearance according to manufacturer specifications provides better engine performance and emission quality.