Claim Missing Document
Check
Articles

Found 2 Documents
Search

Flow characteristics and drag reduction of tandem Serie-parallel circular cylinders: acombined numerical and experimental study W. Rauf; M. Rifal; R. Pido; R.H. Boli; N. Bumulo
Dinamika Teknik Mesin Vol 16, No 1 (2026): Dinamika Teknik Mesin: Jurnal Keilmuan dan Terapan Teknik Mesin
Publisher : Universitas Mataram

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.29303/dtm.v16i1.1250

Abstract

This study investigates the fluid flow characteristics and aerodynamic forces acting on three circular cylinders arranged in a tandem serial–parallel configuration using a combination of numerical simulations and experimental measurements. The spacing ratio between cylinders (N/D) was varied from 0.1 to 1.1, while the Reynolds number ranged from 5,029.6 to 21,124.4. The numerical analysis was conducted using Computational Fluid Dynamics (CFD) to evaluate the flow structure and drag coefficient (Cd), and the results were subsequently validated through experimental testing in a subsonic wind tunnel. The findings indicate that both the inter-cylinder spacing and the Reynolds number have a significant influence on wake structure, pressure distribution, and drag magnitude. At small N/D ratios, strong wake interactions between the cylinders generate extensive recirculation zones, low rear pressure, and high drag coefficients. As the N/D ratio increases, wake interference weakens, the flow becomes more orderly and symmetric, and the pressure distribution becomes more uniform, leading to a substantial reduction in drag. A consistent decrease in Cd with increasing Reynolds number is also observed for all configurations. The close agreement between numerical and experimental results demonstrates that the CFD approach accurately captures the flow behavior and aerodynamic forces. These findings provide valuable insights for optimizing tandem cylinder geometries in engineering applications, particularly for drag reduction and the enhancement of aerodynamic efficiency.
Experimental investigation of ethanol–pertamax fuel blends: fuel economy, exhaust emissions, and implications for natural carbon capture W. Rauf; R.H. Boli; R. Pido; N. Bumulo
Dinamika Teknik Mesin Vol 16, No 2 (2026): Dinamika Teknik Mesin: Jurnal Keilmuan dan Terapan Teknik Mesin
Publisher : Universitas Mataram

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.29303/dtm.v16i2.1344

Abstract

This study experimentally evaluates the influence of ethanol–Pertamax fuel blends on fuel consumption, exhaust emission characteristics, and their contribution to reducing the burden on Natural Carbon Capture (NCC) systems. Experiments were conducted using an unmodified 125 cc fuel-injected spark-ignition motorcycle fueled with four blend compositions, namely pure Pertamax (E0), E5, E10, and E15. Fuel consumption was measured over an engine speed range of 1200–5400 rpm, whereas exhaust emissions, including carbon monoxide (CO), hydrocarbons (HC), carbon dioxide (CO2), and oxygen (O2), were quantified using a calibrated exhaust gas analyzer. Among the investigated fuel formulations, the E15 blend exhibited the most favorable results, lowering average fuel consumption by 14.89%, reducing CO emissions by 18.49%, decreasing HC emissions by 30.93%, and achieving a 2.46% reduction in CO2 emissions compared with neat Pertamax. In addition, the residual oxygen concentration in the exhaust increased by 36.52%, indicating more effective fuel oxidation during combustion. This avoided emission is equivalent to the yearly carbon sequestration capacity of approximately 9.6286 mature trees.