This Author published in this journals
All Journal Jurnal Talenta Sipil
Claim Missing Document
Check
Articles

Found 1 Documents
Search

Pengaruh Variasi Superplasticizer dan Accelerator terhadap Workability dan Kuat Tekan Beton High Early Strength Berbasis Silica Fume dan Serat Polypropylene Nurul Aina Syahira; Lina Flaviana Tilik; Siti Nur Indah Sari; Bastoni Bastoni; Lisa Oktaviani; Putri Azzahra; Astina Astina
Jurnal Talenta Sipil Vol 9, No 2 (2026): Agustus
Publisher : Universitas Batanghari Jambi

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.33087/talentasipil.v9i2.1532

Abstract

The excessive use of admixtures in High Early Strength (HES) concrete often triggers an imbalance between early strength development and workability. This study aims to analyze the simultaneous effects of four types of admixtures on workability and compressive strength characteristics, as well as to identify the optimal mix composition for HES concrete with a target strength of f'c 40 MPa. The research method employed a quantitative laboratory experimental approach by varying the concentrations of accelerator 1,5%, 2,5%, dan 3,5% and superplasticizer 1,7%, 2,3%, dan 2,6%, while keeping the contents of silica fume 5% and polypropylene fiber 0.025% constant. Testing included the slump flow of fresh concrete and the cylinder compressive strength at ages of 4, 6, 8 hours, and 28 days. The results showed that the highest slump flow value was achieved by the 1.5% accelerator + 2.6% superplasticizer variation at 610 mm, whereas the highest 28-day compressive strength was obtained by the 3.5% accelerator + 1.7% superplasticizer variation at 69.14 MPa. The superplasticizer was proven to enhance workability, while the addition of accelerator reduced slump flow but significantly accelerated hydration and early strength development. Regression analysis indicated a negative correlation y = -0.076x + 108.45, where excessive fresh concrete workability tended to decrease compressive strength. It is concluded that the 3.5% accelerator variation is the most optimal composition to produce massive early compressive strength development without compromising the final concrete quality, making it highly recommended for rapid construction applications and the precast industry.